Manual host entries not seen by clients?

  • Thread starter Thread starter Rob Carroll IndusCom
  • Start date Start date
R

Rob Carroll IndusCom

Hey everybody,
OK... this is probably a simple issue, but I don't have time to
troubleshoot it. Here's the scoop...

I've got one Windows 2000 server, which is our "everything" server,
including DNS. As far as I can tell, DNS is configured properly.

All Windows clients' DNS settings are served via DHCP, and they all
register themselves in DNS. Pinging Win clients is no problem.

However, there are a few devices (Unix box, AS/400, print server) that
don't broadcast themselves to the DNS server. Since I'd like people
to be able to access these resources via hostname, I've manually
created hostname records in DNS. After doing an IPCONFIG /RELEASE,
/FLUSHDNS, /RENEW, a user can ping these devices. However, if the
user reboots their computer, they can no longer ping these. They can,
however, still ping other Windows clients.

If the user goes and does the IPCONFIG three-step, they can then ping
them again.

What gives?

Thanks,
Rob
 
In Rob Carroll IndusCom <[email protected]> posted their
concerns
Then Kevin made his reply below:
Hey everybody,
OK... this is probably a simple issue, but I don't have time to
troubleshoot it. Here's the scoop...

I've got one Windows 2000 server, which is our "everything" server,
including DNS. As far as I can tell, DNS is configured properly.

All Windows clients' DNS settings are served via DHCP, and they all
register themselves in DNS. Pinging Win clients is no problem.

However, there are a few devices (Unix box, AS/400, print server) that
don't broadcast themselves to the DNS server. Since I'd like people
to be able to access these resources via hostname, I've manually
created hostname records in DNS. After doing an IPCONFIG /RELEASE,
/FLUSHDNS, /RENEW, a user can ping these devices. However, if the
user reboots their computer, they can no longer ping these. They can,
however, still ping other Windows clients.

If the user goes and does the IPCONFIG three-step, they can then ping
them again.

What gives?

Thanks,
Rob
Click to expand...

What address is DHCP assigning for DNS? Make sure DHCP is giving out only
the Win2k DC for DNS.
 
Back
Top