Magicolor 3300 - Network and HD trouble

  • Thread starter Thread starter Marc Wolters
  • Start date Start date
M

Marc Wolters

Some really strange things go on here:

Since the HD is installed (and working fine as it seems) the network
throughput is close to 0. Without the HD installed I have around 1240
Kbytes or nearly 10 MBit - not much since it's a 100 MBit Connection
(set to autodetect on both ends) but enough. Now when the HD is
installed the speed drops to < 50 Kbytes or below 0,5 MBit. Is there
any way to fix this?
 
Marc said:
Some really strange things go on here:

Since the HD is installed (and working fine as it seems) the network
throughput is close to 0. Without the HD installed I have around 1240
Kbytes or nearly 10 MBit - not much since it's a 100 MBit Connection
(set to autodetect on both ends) but enough. Now when the HD is
installed the speed drops to < 50 Kbytes or below 0,5 MBit. Is there
any way to fix this?
Click to expand...

With the hd there is it always writing to the disk before printing?
Could it be a fault with the disk that it cant write to it at a normal
speed.

If it is only doing c. 10 MBit without is it possible to tell it is has
a 100 MBit connection rather than the autodetect?
 
Back
Top