Magicolor 2350 QMS hangs in power safe

  • Thread starter Thread starter bader
  • Start date Start date
B

bader

I have a Minolta 2350 and it works fine except after a couple of hour
in powersaving mode. Than it stops responding and is only accesible
after a hard reboot, eg. power off/on.

I have installed the latest firmware and are runing the printer
through network, tcp/ip.

No extra ram or devices connected to the printer.

Does anyone have a guess to what can solve my problem?
 
bader said:
I have a Minolta 2350 and it works fine except after a couple of hour
in powersaving mode. Than it stops responding and is only accesible
after a hard reboot, eg. power off/on.

I have installed the latest firmware and are runing the printer
through network, tcp/ip.

No extra ram or devices connected to the printer.

Does anyone have a guess to what can solve my problem?
Click to expand...

can you tell me which firmware you are using at the moment?
And can you get access to the PageScope Light?
 
bader said:
I have a Minolta 2350 and it works fine except after a couple of hour
in powersaving mode. Than it stops responding and is only accesible
after a hard reboot, eg. power off/on.

I have installed the latest firmware and are runing the printer
through network, tcp/ip.

No extra ram or devices connected to the printer.

Does anyone have a guess to what can solve my problem?
Click to expand...

I forgot one question: are you using the Crown Printer Port
or normal tcp/ip?
 
Hi.

I use the latest firmware, 3.0.5, with a enginefirmware number of
413150G00800
and i use only TCP/Ip for printing and administration.
I can administrate the printer throug the page scope while it is alife
but when it freez there are no response.

I made som configuration changes and it seems to have solved my
problem since the printer havent frozen on me for 2 days now.
The changes i made was to disable the USB and Parallel ports on the
printer.

When i print i have created a TCP/IP port, if that is what you mean.

/Bader
 
bader said:
Hi.

I use the latest firmware, 3.0.5, with a enginefirmware number of
413150G00800
and i use only TCP/Ip for printing and administration.
I can administrate the printer throug the page scope while it is alife
but when it freez there are no response.

I made som configuration changes and it seems to have solved my
problem since the printer havent frozen on me for 2 days now.
The changes i made was to disable the USB and Parallel ports on the
printer.

When i print i have created a TCP/IP port, if that is what you mean.
Click to expand...
Hi, Bader,

If you still have problems with your printer, please let me know!
best regards,
Martijn
 
Back
Top