LTO HP: How to now how much has been used...

  • Thread starter Thread starter Masterx81
  • Start date Start date
M

Masterx81

Hi to all...
I've bought an used LTO HP Ultrium 1, and i want to know how much it
was used, i've tryied with the hp l&tt utility (versions 3.5 SR4 e
4.4), but it doesn't say me nothing about the usage.
If i well remember with an older version of the l&tt i was able to
read that data (with a dds drive), but i cannot find that version.
Soemone know an utility (or the right l&tt version) that i can use to
read this counters?
Thanks!!
 
Hi to all...
I've bought an used LTO HP Ultrium 1, and i want to know how much it
was used, i've tryied with the hp l&tt utility (versions 3.5 SR4 e
4.4), but it doesn't say me nothing about the usage.
If i well remember with an older version of the l&tt i was able to
read that data (with a dds drive), but i cannot find that version.
Soemone know an utility (or the right l&tt version) that i can use to
read this counters?
Thanks!!
Click to expand...

I've discovered that this is a dell unit, and i've downloaded the
software (that is the same as the hp, but older) and this are the
result:
Power on hours: 196147
Tape pulling: 99hr
Meters pulled: 680232m
number of lod/unload: 217
head clean operation: 0
MR head A resistances: 73 72 70 69 70 68 69 69 ohm
MR head B resistances: 62 63 65 65 66 68 71 72 ohm

How this values are???
I've made a good deal or it's at it's end of life?
I've tryied it, and don't do more than 1 mb/s of wrting speed... not
seem that good...
 
Back
Top