Logitech QuickCam Pro 4000

  • Thread starter Thread starter Walter Blanchard [WalterB]
  • Start date Start date
W

Walter Blanchard [WalterB]

Has anyone been able to the the Logitech QuickCam Pro 4000 installed on
Vista x64?

--

______________________________

Walter B
walterb[at]tampabay[dot]rr[dot]com
______________________________
 
Latest Vista drivers (10....) work fine here for Logitech Pro5000
On RC2 x64.


| Has anyone been able to the the Logitech QuickCam Pro 4000 installed on
| Vista x64?
|
| --
|
| ______________________________
|
| Walter B
| walterb[at]tampabay[dot]rr[dot]com
| ______________________________
|
|
 
There are 64 bit drivers and also 32 bit drivers. Make sure you obtained the
correct ones.

--


Regards,

Richard Urban
Microsoft MVP Windows Shell/User
(For email, remove the obvious from my address)

Quote from George Ankner:
If you knew as much as you think you know,
You would realize that you don't know what you thought you knew!
 
Logitech doesn't list Vista drivers for this webcam,
but maybe you could try the 5000 drivers since
the size of the Vista drivers for other cams seems to
be the same. 10.4 drivers, i.e.


| There are 64 bit drivers and also 32 bit drivers. Make sure you obtained the
| correct ones.
|
| --
|
|
| Regards,
|
| Richard Urban
| Microsoft MVP Windows Shell/User
| (For email, remove the obvious from my address)
|
| Quote from George Ankner:
| If you knew as much as you think you know,
| You would realize that you don't know what you thought you knew!
|
|
|
| | > Has anyone been able to the the Logitech QuickCam Pro 4000 installed on
| > Vista x64?
| >
| > --
| >
| > ______________________________
| >
| > Walter B
| > walterb[at]tampabay[dot]rr[dot]com
| > ______________________________
| >
| >
|
 
Thanks, all.

--

______________________________

Walter B
walterb[at]tampabay[dot]rr[dot]com
______________________________
 
Walter,

If there are Windows XP drivers for 64 bit use those. I extract the driver
directory from the Logitech download and manually install them through the
device manager. Works well for me on the 32 bit side.

HTH.


--
Richard Hay
Windows Live Butterfly
Windows Beta Tester
http://WindowsObserver.com

Thanks, all.

--

______________________________

Walter B
walterb[at]tampabay[dot]rr[dot]com
______________________________
 
Thanks, Richard, will do.

--

______________________________

Walter B
walterb[at]tampabay[dot]rr[dot]com
______________________________


Richard Hay said:
Walter,

If there are Windows XP drivers for 64 bit use those. I extract the
driver directory from the Logitech download and manually install them
through the device manager. Works well for me on the 32 bit side.

HTH.


--
Richard Hay
Windows Live Butterfly
Windows Beta Tester
http://WindowsObserver.com

Thanks, all.

--

______________________________

Walter B
walterb[at]tampabay[dot]rr[dot]com
______________________________


Walter Blanchard said:
Has anyone been able to the the Logitech QuickCam Pro 4000 installed on
Vista x64?

--

______________________________

Walter B
walterb[at]tampabay[dot]rr[dot]com
______________________________
Click to expand...
Click to expand...
 
Just use the Windows XP Drivers for the Logitech QuckCam Pro 4000. Works on
Vista RTM just fine.
 
I have Vista Ultimate 6.0.6000 and I am afraid that I cannot get my QuickCam
Pro 4000 to work. The software installs fine but the camera will not work.



Stephen Cardinale said:
Just use the Windows XP Drivers for the Logitech QuckCam Pro 4000. Works
on Vista RTM just fine.
Walter Blanchard said:
Has anyone been able to the the Logitech QuickCam Pro 4000 installed on
Vista x64?

--

______________________________

Walter B
walterb[at]tampabay[dot]rr[dot]com
______________________________
Click to expand...
Click to expand...
 
Did you install the drivers in XP compatibility mode
(right click install file.>compat. tab)?


|I have Vista Ultimate 6.0.6000 and I am afraid that I cannot get my QuickCam
| Pro 4000 to work. The software installs fine but the camera will not work.
|
|
|
| | > Just use the Windows XP Drivers for the Logitech QuckCam Pro 4000. Works
| > on Vista RTM just fine.
| > | >> Has anyone been able to the the Logitech QuickCam Pro 4000 installed on
| >> Vista x64?
| >>
| >> --
| >>
| >> ______________________________
| >>
| >> Walter B
| >> walterb[at]tampabay[dot]rr[dot]com
| >> ______________________________
| >>
| >>
| >
|
 
I get this camera to work by just doing a driver install of the last version
made for the Pro 4000. I do not install the Quickcam software from that
version because it will not work. Extract those XP drivers from the execute
file.
 
I tried a normal install and I used the compatibility wizard with various
settings and every time I got the message that "mfc40.dll access denied"
and the installation terminated.
 
So far it appears that Logitech does not intend to support the Pro
4000. They have released x64 and x86 Vista drivers (10.5) for
several cams. The only Vista compatibility chart I can find on
the Logitech site is for x64 only and the Pro 4000 is not listed there.
Perhaps they will provide support in the future. Have you tried
contacting them?


|I tried a normal install and I used the compatibility wizard with various
| settings and every time I got the message that "mfc40.dll access denied"
| and the installation terminated.
|
| | > Did you install the drivers in XP compatibility mode
| > (right click install file.>compat. tab)?
| >
| >
| > | > |I have Vista Ultimate 6.0.6000 and I am afraid that I cannot get my
| > QuickCam
| > | Pro 4000 to work. The software installs fine but the camera will not
| > work.
| > |
| > |
| > |
| > message
| > | | > | > Just use the Windows XP Drivers for the Logitech QuckCam Pro 4000.
| > Works
| > | > on Vista RTM just fine.
| > | > | > | >> Has anyone been able to the the Logitech QuickCam Pro 4000 installed
| > on
| > | >> Vista x64?
| > | >>
| > | >> --
| > | >>
| > | >> ______________________________
| > | >>
| > | >> Walter B
| > | >> walterb[at]tampabay[dot]rr[dot]com
| > | >> ______________________________
| > | >>
| > | >>
| > | >
| > |
| >
| >
|
 
I left a message on their customer support site a couple of days ago and
await a response.
 
I don't believe they will support the Pro 4000 in Vista - their current
drivers (the beta ones) do not have it in there.

XP drivers work well as discussed before.

Good luck though with them.


--
Richard Hay
Windows Live Butterfly
Windows Beta Tester
http://WindowsObserver.com

Stan Kay said:
I left a message on their customer support site a couple of days ago and
await a response.


DCR said:
So far it appears that Logitech does not intend to support the Pro
4000. They have released x64 and x86 Vista drivers (10.5) for
several cams. The only Vista compatibility chart I can find on
the Logitech site is for x64 only and the Pro 4000 is not listed there.
Perhaps they will provide support in the future. Have you tried
contacting them?


|I tried a normal install and I used the compatibility wizard with
various
| settings and every time I got the message that "mfc40.dll access
denied"
| and the installation terminated.
|
| | > Did you install the drivers in XP compatibility mode
| > (right click install file.>compat. tab)?
| >
| >
| > | > |I have Vista Ultimate 6.0.6000 and I am afraid that I cannot get my
| > QuickCam
| > | Pro 4000 to work. The software installs fine but the camera will
not
| > work.
| > |
| > |
| > |
| > message
| > | | > | > Just use the Windows XP Drivers for the Logitech QuckCam Pro
4000.
| > Works
| > | > on Vista RTM just fine.
| > | > | > | >> Has anyone been able to the the Logitech QuickCam Pro 4000
installed
| > on
| > | >> Vista x64?
| > | >>
| > | >> --
| > | >>
| > | >> ______________________________
| > | >>
| > | >> Walter B
| > | >> walterb[at]tampabay[dot]rr[dot]com
| > | >> ______________________________
| > | >>
| > | >>
| > | >
| > |
| >
| >
|
Click to expand...
Click to expand...
 
I am afraid it does not work with Windows Vista Ultimate (ver 6000). I
tried a normal install and I used the compatibility wizard with various
settings and every time I got the message that "mfc40.dll access denied"
and the installation terminated.

I guess I am out of luck!

Richard Hay said:
I don't believe they will support the Pro 4000 in Vista - their current
drivers (the beta ones) do not have it in there.

XP drivers work well as discussed before.

Good luck though with them.


--
Richard Hay
Windows Live Butterfly
Windows Beta Tester
http://WindowsObserver.com

Stan Kay said:
I left a message on their customer support site a couple of days ago and
await a response.


DCR said:
So far it appears that Logitech does not intend to support the Pro
4000. They have released x64 and x86 Vista drivers (10.5) for
several cams. The only Vista compatibility chart I can find on
the Logitech site is for x64 only and the Pro 4000 is not listed there.
Perhaps they will provide support in the future. Have you tried
contacting them?


|I tried a normal install and I used the compatibility wizard with
various
| settings and every time I got the message that "mfc40.dll access
denied"
| and the installation terminated.
|
| | > Did you install the drivers in XP compatibility mode
| > (right click install file.>compat. tab)?
| >
| >
| > | > |I have Vista Ultimate 6.0.6000 and I am afraid that I cannot get my
| > QuickCam
| > | Pro 4000 to work. The software installs fine but the camera will
not
| > work.
| > |
| > |
| > |
| > message
| > | | > | > Just use the Windows XP Drivers for the Logitech QuckCam Pro
4000.
| > Works
| > | > on Vista RTM just fine.
| > | > | > | >> Has anyone been able to the the Logitech QuickCam Pro 4000
installed
| > on
| > | >> Vista x64?
| > | >>
| > | >> --
| > | >>
| > | >> ______________________________
| > | >>
| > | >> Walter B
| > | >> walterb[at]tampabay[dot]rr[dot]com
| > | >> ______________________________
| > | >>
| > | >>
| > | >
| > |
| >
| >
|
Click to expand...
Click to expand...
Click to expand...
 
Richard,
I downloaded the drivers for my 4000 and ran the install program. Next I
cancelled the install once I saw the files were extracted. I saw the files
in C:\Program Files\Logitech. But, when I try to install the cam and point
to the drivers folder, Vista doesn't find anything (I checked "include
subfolders"). Any ideas?


Richard Hay said:
I get this camera to work by just doing a driver install of the last version
made for the Pro 4000. I do not install the Quickcam software from that
version because it will not work. Extract those XP drivers from the execute
file.


--
Richard Hay
Windows Live Butterfly
Windows Beta Tester
http://WindowsObserver.com

DCR said:
Did you install the drivers in XP compatibility mode
(right click install file.>compat. tab)?


|I have Vista Ultimate 6.0.6000 and I am afraid that I cannot get my
QuickCam
| Pro 4000 to work. The software installs fine but the camera will not
work.
|
|
|
message
| | > Just use the Windows XP Drivers for the Logitech QuckCam Pro 4000.
Works
| > on Vista RTM just fine.
| > | >> Has anyone been able to the the Logitech QuickCam Pro 4000 installed
on
| >> Vista x64?
| >>
| >> --
| >>
| >> ______________________________
| >>
| >> Walter B
| >> walterb[at]tampabay[dot]rr[dot]com
| >> ______________________________
| >>
| >>
| >
|
Click to expand...
Click to expand...
 
Back
Top