Logging on to SBS 2000

  • Thread starter Thread starter Bill
  • Start date Start date
B

Bill

Logging into SBS 2000 is very slow and takes around a
minute or more before it verifies the username and
password and runs the client loging script. Anybody know
the cause of this. Never seen it before.

Thanks,
Bill
 
Bill said:
Logging into SBS 2000 is very slow and takes around a
minute or more before it verifies the username and
password and runs the client loging script. Anybody know
the cause of this. Never seen it before.

Thanks,
Bill
Click to expand...


Slow logons are usually caused by DNS misconfiguration.

XP differs from previous versions of windows in that it uses
DNS as it's primary name resolution method for finding domain
controllers:

How Domain Controllers Are Located in Windows XP
http://support.microsoft.com/default.aspx?scid=kb;en-us;314861

If DNS is misconfigured, XP will spend a lot of time waiting for it to
timeout before it tries using legacy NT4 sytle NetBIOS.
( Which may or may not work. )

1) Ensure that the XP clients are all configured to point to the local
DNS server which hosts the AD domain. That will probably be the
win2k server itself.
They should NOT be pointing an an ISP's DNS server.
An 'ipconfig /all' on the XP box should reveal ONLY the domain's
DNS server.

( you should use the DHCP server to push out the local DNS server
address. )

2) Ensure DNS server on win2k is configured to permit dynamic updates.

3) Ensure the win2k server points to itself as a DNS server.

4) For external ( internet ) name resolution, specify your ISP's DNS server
not on the clients, but in the 'forwarders' tab of the local win2k DNS
server.

On the DNS server, if you cannot access the 'Forwarders' and 'Root Hints'
tabs because they are greyed out, that is because there is a root zone (".")
present on the DNS server. You MUST delete this root zone to permit the
server to forward unresolved
quehttp://support.microsoft.com/default.aspx?scid=kb;en-us;300202
 
Thank you very much.
-----Original Message-----



Slow logons are usually caused by DNS misconfiguration.

XP differs from previous versions of windows in that it uses
DNS as it's primary name resolution method for finding domain
controllers:

How Domain Controllers Are Located in Windows XP
http://support.microsoft.com/default.aspx?scid=kb;en- us;314861

If DNS is misconfigured, XP will spend a lot of time waiting for it to
timeout before it tries using legacy NT4 sytle NetBIOS.
( Which may or may not work. )

1) Ensure that the XP clients are all configured to point to the local
DNS server which hosts the AD domain. That will probably be the
win2k server itself.
They should NOT be pointing an an ISP's DNS server.
An 'ipconfig /all' on the XP box should reveal ONLY the domain's
DNS server.

( you should use the DHCP server to push out the local DNS server
address. )

2) Ensure DNS server on win2k is configured to permit dynamic updates.

3) Ensure the win2k server points to itself as a DNS server.

4) For external ( internet ) name resolution, specify your ISP's DNS server
not on the clients, but in the 'forwarders' tab of the local win2k DNS
server.

On the DNS server, if you cannot access the 'Forwarders' and 'Root Hints'
tabs because they are greyed out, that is because there is a root zone (".")
present on the DNS server. You MUST delete this root zone to permit the
server to forward unresolved
quehttp://support.microsoft.com/default.aspx?scid=kb;en- us;300202


--
Best Regards,
Ron Lowe
MS-MVP Windows Networking


.
Click to expand...
 
Back
Top