loading new xp removing old system

  • Thread starter Thread starter david schofield
  • Start date Start date
D

david schofield

i have a second hand processer that has windows xp pro
loaded. but i have purchased xp home to load for myself .
how do i load my new xp home and remove the xp pro thats
loaded?
thanks
 
First, why would you want to do that? Pro is better.

but, if you must, you'll have to boot from the cd and do a fresh install, or
multiboot install.
 
David;
You can not downgrade, a Clean Installation is necessary.
Clean Installation
Disconnect all peripherals (camera, printer, scanner, etc)
Disconnect network/modem cable.
Go to BIOS and set CDROM as boot device before hard drive.
Insert Windows XP CD and reboot.
At "Press any key to boot to CDROM" quickly press a key and follow the
prompts for a Clean installation:
http://www.winsupersite.com/showcase/windowsxp_sg_clean.asp
Delete all partitions in step 5 if you desire to erase all data on the
hard drive.
Partitioning and formatting will be done automatically.
All data will be destroyed, back-up important data first.

Enable or install firewall BEFORE connecting network cable.
http://support.microsoft.com/?kbid=283673

Install ALL Critical Windows Updates:
Start/All Programs/Windows Update

After you are finished, you will need to load the appropriate drivers.

If your computer was shipped with Windows XP, these procedures may or
may not apply.
Check your manual or contact the computer manufacturer for more
details.
 
isn't that what i said 10 hours before you?

Jupiter Jones said:
David;
You can not downgrade, a Clean Installation is necessary.
Clean Installation
Disconnect all peripherals (camera, printer, scanner, etc)
Disconnect network/modem cable.
Go to BIOS and set CDROM as boot device before hard drive.
Insert Windows XP CD and reboot.
At "Press any key to boot to CDROM" quickly press a key and follow the
prompts for a Clean installation:
http://www.winsupersite.com/showcase/windowsxp_sg_clean.asp
Delete all partitions in step 5 if you desire to erase all data on the
hard drive.
Partitioning and formatting will be done automatically.
All data will be destroyed, back-up important data first.

Enable or install firewall BEFORE connecting network cable.
http://support.microsoft.com/?kbid=283673

Install ALL Critical Windows Updates:
Start/All Programs/Windows Update

After you are finished, you will need to load the appropriate drivers.

If your computer was shipped with Windows XP, these procedures may or
may not apply.
Check your manual or contact the computer manufacturer for more
details.

--
Jupiter Jones [MVP]
An easier way to read newsgroup messages:
http://www.microsoft.com/windowsxp/pro/using/newsgroups/setup.asp
http://dts-l.org/index.html
Click to expand...
 
Back
Top