Load driver for RAID controller

  • Thread starter Thread starter Michele
  • Start date Start date
M

Michele

Hi, I have my pc with windows xp installed on hdd that is attached to a
standard ide controller but now i want to use RAID capability of my
controllor but i must load "iastorm.sys" driver to recognize disk, so it is
possible to load new driver without a fresh installation.
Thanks
 
A friend called because their computer wouldn't boot.
The HDD seems to be defective, running "chkdsk /r" from the recovery console
results in a message of 'there are unrecoverable errors on the drive'
After installing a new HDD and reinstalling XP, I plugged the old HDD in as
a slave, but XP says...the disk is not formatted, would you like to format
it now?
Sometimes you can get lucky and recover data with data recovery tools that
do not rely on Windows to read the HDD.
Does anyone have a suggestion for a program to try?
 
Youre missing a few major areas...Just setting the BIOS for RAID controller
use
will get you nowhere,specially with an IDE hd.For RAID & RAID controller,you
need two SATA hds,once the same two are plugged into the controller,set BIOS
for RAID (usually advanced chipset),then set to boot to RAID (2nd
priority,cdrom
1st),once you exit BIOS,a post BIOS utility appears to set up a RAID set,once
thru,boot to xp cd,press F6,install RAID controller drivers,after,return to
xp cd
set up page....
 
Maybe I didn't explain well what is my problem.
I have a pc that works fine with windows xp and yhe installation is on hard
disk that is attached on standard ide controller (ICH7R) but now I want to
use a RAID capability of my chipset so I bought two new hard disk and I
created a RADI 1 and clone old installation on RAID disk but when I boot
with RAID disk Windows XP fails to start and reboot automatically.
I think the problem is hard disk controller driver that is not valid now and
I want to setup new driver without fresh installation.
Thanks
 
I have to do a repair install, after cloning and subsequent removal of
original HD, providing (ON FLOPPY) the RAID drivers for your controller.
That's at the point when booting from the CD, it says at the bottom line
"Press F6 to install drivers" or something as such...

Repair installation advice at
http://www.michaelstevenstech.com/XPrepairinstall.htm


--
Tumppi
=================================
A lot learned from these newsgroups
Helsinki, FINLAND
(translations from/to FI not always accurate
=================================
 
download raid controller



Michele wrote:

Load driver for RAID controller
28-Dec-07

Hi, I have my pc with windows xp installed on hdd that is attached to a
standard ide controller but now i want to use RAID capability of my
controllor but i must load "iastorm.sys" driver to recognize disk, so it is
possible to load new driver without a fresh installation
Thanks

Previous Posts In This Thread:

Load driver for RAID controller
Hi, I have my pc with windows xp installed on hdd that is attached to a
standard ide controller but now i want to use RAID capability of my
controllor but i must load "iastorm.sys" driver to recognize disk, so it is
possible to load new driver without a fresh installation
Thanks

Youre missing a few major areas...
Youre missing a few major areas...Just setting the BIOS for RAID controller
us
will get you nowhere,specially with an IDE hd.For RAID & RAID controller,yo
need two SATA hds,once the same two are plugged into the controller,set BIO
for RAID (usually advanced chipset),then set to boot to RAID (2nd
priority,cdro
1st),once you exit BIOS,a post BIOS utility appears to set up a RAID set,onc
thru,boot to xp cd,press F6,install RAID controller drivers,after,return to
xp c
set up page....

:

Maybe I didn't explain well what is my problem.
Maybe I didn't explain well what is my problem
I have a pc that works fine with windows xp and yhe installation is on hard
disk that is attached on standard ide controller (ICH7R) but now I want to
use a RAID capability of my chipset so I bought two new hard disk and I
created a RADI 1 and clone old installation on RAID disk but when I boot
with RAID disk Windows XP fails to start and reboot automatically
I think the problem is hard disk controller driver that is not valid now and
I want to setup new driver without fresh installation
Thank

"Andrew E." <[email protected]> ha scritto nel messaggio

Re: Load driver for RAID controller
Delete your article, fix your date/time and repos

-
Bjarke Andersen

I have to do a repair install, after cloning and subsequent removal of
I have to do a repair install, after cloning and subsequent removal of
original HD, providing (ON FLOPPY) the RAID drivers for your controller
That's at the point when booting from the CD, it says at the bottom line
"Press F6 to install drivers" or something as such..

Repair installation advice at
http://www.michaelstevenstech.com/XPrepairinstall.ht

--
Tumpp
================================
A lot learned from these newsgroup
Helsinki, FINLAN
(translations from/to FI not always accurat
================================


"Michele" <[email protected]> kirjoitti
viestiss?:[email protected]...


Submitted via EggHeadCafe - Software Developer Portal of Choice
Dr. Dotnetsky's Cool .Net Tips & Tricks #21
http://www.eggheadcafe.com/tutorial...a097-dd7f54909272/dr-dotnetskys-cool-net.aspx
 
Well they may think it's a regular "Website" forum
and not a website that "Copies" information..
???
I don't know maybe they all have time machines?
and we are the ones posting outside of time?
LOL
Russ

--
Russell Grover - SBITS.Biz [SBS-MVP]
Microsoft Gold Certified Partner
Microsoft Certified Small Business Specialist
24hr SBS Remote Support - www.SBITS.Biz
Question or Second Opinion - www.PersonalITConsultant.com
Free Trial Microsoft Online Services - www.Microsoft-Online-Services.com


David B. said:
Yeah, but even those idiots should be able to see the date of the post

--


--
Russ SBITS.Biz said:
Because he's using eggheadcafe
instead of a NNTP news reader :(
Russ

--
Russell Grover - SBITS.Biz [SBS-MVP]
Microsoft Gold Certified Partner
Microsoft Certified Small Business Specialist
24hr SBS Remote Support - www.SBITS.Biz
Question or Second Opinion - www.PersonalITConsultant.com
Free Trial Microsoft Online Services - www.Microsoft-Online-Services.com


David B. said:
Why are you replying to a 2 year old thread?

--


--
in message
download raid controller



Michele wrote:

Load driver for RAID controller
28-Dec-07

Hi, I have my pc with windows xp installed on hdd that is attached to a
standard ide controller but now i want to use RAID capability of my
controllor but i must load "iastorm.sys" driver to recognize disk, so
it is
possible to load new driver without a fresh installation.
Thanks

Previous Posts In This Thread:

Load driver for RAID controller
Hi, I have my pc with windows xp installed on hdd that is attached to a
standard ide controller but now i want to use RAID capability of my
controllor but i must load "iastorm.sys" driver to recognize disk, so
it is
possible to load new driver without a fresh installation.
Thanks

Youre missing a few major areas...
Youre missing a few major areas...Just setting the BIOS for RAID
controller
use
will get you nowhere,specially with an IDE hd.For RAID & RAID
controller,you
need two SATA hds,once the same two are plugged into the controller,set
BIOS
for RAID (usually advanced chipset),then set to boot to RAID (2nd
priority,cdrom
1st),once you exit BIOS,a post BIOS utility appears to set up a RAID
set,once
thru,boot to xp cd,press F6,install RAID controller
drivers,after,return to
xp cd
set up page....

:

Maybe I didn't explain well what is my problem.
Maybe I didn't explain well what is my problem.
I have a pc that works fine with windows xp and yhe installation is on
hard
disk that is attached on standard ide controller (ICH7R) but now I want
to
use a RAID capability of my chipset so I bought two new hard disk and I
created a RADI 1 and clone old installation on RAID disk but when I
boot
with RAID disk Windows XP fails to start and reboot automatically.
I think the problem is hard disk controller driver that is not valid
now and
I want to setup new driver without fresh installation.
Thanks


"Andrew E." <[email protected]> ha scritto nel messaggio

Re: Load driver for RAID controller
Delete your article, fix your date/time and repost

--
Bjarke Andersen

I have to do a repair install, after cloning and subsequent removal of
I have to do a repair install, after cloning and subsequent removal of
original HD, providing (ON FLOPPY) the RAID drivers for your
controller.
That's at the point when booting from the CD, it says at the bottom
line
"Press F6 to install drivers" or something as such...

Repair installation advice at
http://www.michaelstevenstech.com/XPrepairinstall.htm


--
Tumppi
=================================
A lot learned from these newsgroups
Helsinki, FINLAND
(translations from/to FI not always accurate
=================================




"Michele" <[email protected]> kirjoitti
viestiss?:[email protected]...


Submitted via EggHeadCafe - Software Developer Portal of Choice
Dr. Dotnetsky's Cool .Net Tips & Tricks #21
http://www.eggheadcafe.com/tutorial...a097-dd7f54909272/dr-dotnetskys-cool-net.aspx
Click to expand...
Click to expand...
Click to expand...
 
From great albania.



Michele wrote:

Load driver for RAID controller
28-Dec-07

Hi, I have my pc with windows xp installed on hdd that is attached to a
standard ide controller but now i want to use RAID capability of my
controllor but i must load "iastorm.sys" driver to recognize disk, so it is
possible to load new driver without a fresh installation.
Thanks

Previous Posts In This Thread:

Load driver for RAID controller
Hi, I have my pc with windows xp installed on hdd that is attached to a
standard ide controller but now i want to use RAID capability of my
controllor but i must load "iastorm.sys" driver to recognize disk, so it is
possible to load new driver without a fresh installation.
Thanks

Youre missing a few major areas...
Youre missing a few major areas...Just setting the BIOS for RAID controller
use
will get you nowhere,specially with an IDE hd.For RAID & RAID controller,you
need two SATA hds,once the same two are plugged into the controller,set BIOS
for RAID (usually advanced chipset),then set to boot to RAID (2nd
priority,cdrom
1st),once you exit BIOS,a post BIOS utility appears to set up a RAID set,once
thru,boot to xp cd,press F6,install RAID controller drivers,after,return to
xp cd
set up page....

:

Maybe I didn't explain well what is my problem.
Maybe I didn't explain well what is my problem.
I have a pc that works fine with windows xp and yhe installation is on hard
disk that is attached on standard ide controller (ICH7R) but now I want to
use a RAID capability of my chipset so I bought two new hard disk and I
created a RADI 1 and clone old installation on RAID disk but when I boot
with RAID disk Windows XP fails to start and reboot automatically.
I think the problem is hard disk controller driver that is not valid now and
I want to setup new driver without fresh installation.
Thanks


"Andrew E." <[email protected]> ha scritto nel messaggio

Re: Load driver for RAID controller
Delete your article, fix your date/time and repost

--
Bjarke Andersen

I have to do a repair install, after cloning and subsequent removal of
I have to do a repair install, after cloning and subsequent removal of
original HD, providing (ON FLOPPY) the RAID drivers for your controller.
That's at the point when booting from the CD, it says at the bottom line
"Press F6 to install drivers" or something as such...

Repair installation advice at
http://www.michaelstevenstech.com/XPrepairinstall.htm


--
Tumppi
=================================
A lot learned from these newsgroups
Helsinki, FINLAND
(translations from/to FI not always accurate
=================================




"Michele" <[email protected]> kirjoitti
viestiss?:[email protected]...

raid controller
download raid controller

Why are you replying to a 2 year old thread?
Why are you replying to a 2 year old thread?

--


--
in message

Because he is using eggheadcafeinstead of a NNTP news reader :(Russ--Russell
Because he is using eggheadcafe
instead of a NNTP news reader :(
Russ

--
Russell Grover - SBITS.Biz [SBS-MVP]
Microsoft Gold Certified Partner
Microsoft Certified Small Business Specialist
24hr SBS Remote Support - www.SBITS.Biz
Question or Second Opinion - www.PersonalITConsultant.com
Free Trial Microsoft Online Services - www.Microsoft-Online-Services.com

Yeah, but even those idiots should be able to see the date of the post----
Yeah, but even those idiots should be able to see the date of the post

--


--

Well they may think it is a regular "Website" forumand not a website that
Well they may think it is a regular "Website" forum
and not a website that "Copies" information..
???
I do not know maybe they all have time machines?
and we are the ones posting outside of time?
LOL
Russ

--
Russell Grover - SBITS.Biz [SBS-MVP]
Microsoft Gold Certified Partner
Microsoft Certified Small Business Specialist
24hr SBS Remote Support - www.SBITS.Biz
Question or Second Opinion - www.PersonalITConsultant.com
Free Trial Microsoft Online Services - www.Microsoft-Online-Services.com


Submitted via EggHeadCafe - Software Developer Portal of Choice
WPF Datagrid as ComboBox Dropdown Part 2
http://www.eggheadcafe.com/tutorial...96-e24127040bbf/wpf-datagrid-as-combobox.aspx
 
Please note that you have to stop using EggheadCafe if you need any help on
these
newsgroups. The only means left for you to get help here is to use this
link:

news://msnews.microsoft.com/microsoft.public.windowsxp.hardware

Please start your post from scratch so that Pig-Bear can solve your problem.

hth

From great albania.
Click to expand...
< snipped due to apropos of nothing!!! >
 
Another Deadhead at Egghead

--
Peter

Please Reply to Newsgroup for the benefit of others
Requests for assistance by email can not and will not be acknowledged.

From great albania.



Michele wrote:

Load driver for RAID controller
28-Dec-07

Hi, I have my pc with windows xp installed on hdd that is attached to a
standard ide controller but now i want to use RAID capability of my
controllor but i must load "iastorm.sys" driver to recognize disk, so it is
possible to load new driver without a fresh installation.
Thanks

Previous Posts In This Thread:

Load driver for RAID controller
Hi, I have my pc with windows xp installed on hdd that is attached to a
standard ide controller but now i want to use RAID capability of my
controllor but i must load "iastorm.sys" driver to recognize disk, so it is
possible to load new driver without a fresh installation.
Thanks

Youre missing a few major areas...
Youre missing a few major areas...Just setting the BIOS for RAID controller
use
will get you nowhere,specially with an IDE hd.For RAID & RAID controller,you
need two SATA hds,once the same two are plugged into the controller,set BIOS
for RAID (usually advanced chipset),then set to boot to RAID (2nd
priority,cdrom
1st),once you exit BIOS,a post BIOS utility appears to set up a RAID set,once
thru,boot to xp cd,press F6,install RAID controller drivers,after,return to
xp cd
set up page....

:

Maybe I didn't explain well what is my problem.
Maybe I didn't explain well what is my problem.
I have a pc that works fine with windows xp and yhe installation is on hard
disk that is attached on standard ide controller (ICH7R) but now I want to
use a RAID capability of my chipset so I bought two new hard disk and I
created a RADI 1 and clone old installation on RAID disk but when I boot
with RAID disk Windows XP fails to start and reboot automatically.
I think the problem is hard disk controller driver that is not valid now and
I want to setup new driver without fresh installation.
Thanks


"Andrew E." <[email protected]> ha scritto nel messaggio

Re: Load driver for RAID controller
Delete your article, fix your date/time and repost

--
Bjarke Andersen

I have to do a repair install, after cloning and subsequent removal of
I have to do a repair install, after cloning and subsequent removal of
original HD, providing (ON FLOPPY) the RAID drivers for your controller.
That's at the point when booting from the CD, it says at the bottom line
"Press F6 to install drivers" or something as such...

Repair installation advice at
http://www.michaelstevenstech.com/XPrepairinstall.htm


--
Tumppi
=================================
A lot learned from these newsgroups
Helsinki, FINLAND
(translations from/to FI not always accurate
=================================




"Michele" <[email protected]> kirjoitti
viestiss?:[email protected]...

raid controller
download raid controller

Why are you replying to a 2 year old thread?
Why are you replying to a 2 year old thread?

--


--
in message

Because he is using eggheadcafeinstead of a NNTP news reader :(Russ--Russell
Because he is using eggheadcafe
instead of a NNTP news reader :(
Russ

--
Russell Grover - SBITS.Biz [SBS-MVP]
Microsoft Gold Certified Partner
Microsoft Certified Small Business Specialist
24hr SBS Remote Support - www.SBITS.Biz
Question or Second Opinion - www.PersonalITConsultant.com
Free Trial Microsoft Online Services - www.Microsoft-Online-Services.com

Yeah, but even those idiots should be able to see the date of the post----
Yeah, but even those idiots should be able to see the date of the post

--


--

Well they may think it is a regular "Website" forumand not a website that
Well they may think it is a regular "Website" forum
and not a website that "Copies" information..
???
I do not know maybe they all have time machines?
and we are the ones posting outside of time?
LOL
Russ

--
Russell Grover - SBITS.Biz [SBS-MVP]
Microsoft Gold Certified Partner
Microsoft Certified Small Business Specialist
24hr SBS Remote Support - www.SBITS.Biz
Question or Second Opinion - www.PersonalITConsultant.com
Free Trial Microsoft Online Services - www.Microsoft-Online-Services.com


Submitted via EggHeadCafe - Software Developer Portal of Choice
WPF Datagrid as ComboBox Dropdown Part 2
http://www.eggheadcafe.com/tutorial...96-e24127040bbf/wpf-datagrid-as-combobox.aspx
Click to expand...
 
Back
Top