Linksys Router IP

  • Thread starter Thread starter Jamie
  • Start date Start date
Use IPCONFIG /ALL or WinIPCfg and find out what your Gateway IP is... That
is your router.
 
Are you using a hardwired connection? If you can't find the correct
address, you can do a hard reset on the router which should return it to the
default address. I am assuming you mean you can't get to the login page.

Clark
 
Tried that didn't work, when I use ipconfig /all xp kills the command window
any other sugestions. Thanks in advance. Yes i meant I can't get into the
login. BEFW11S4 ver 4 is the router.
 
Jamie said:
Tried that didn't work, when I use ipconfig /all xp kills the command window
any other sugestions. Thanks in advance. Yes i meant I can't get into the
login. BEFW11S4 ver 4 is the router.
Click to expand...

If you are in a command window and run ipconfig /all the window should NOT
go away. If it does, you're infected with a virus or have some really crappy
internet security software running.

You should be able to get the info from the properties of the network
connection icon as well...
 
Tried that didn't work, when I use ipconfig /all xp kills the command window
any other sugestions. Thanks in advance. Yes i meant I can't get into the
login. BEFW11S4 ver 4 is the router.
Click to expand...

If you mean that you type it at the start->run box, first
open a command prompt window with "CMD".

If the networking tools themselves aren't installed, check
windows' installed features in add/remove programs (install
them).
 
i got the same router
it should be 192.168.1.1
cycling the power or reseting it,(little button at the back)
 
192.168.1.1 should be the router. If you hold the
reset button on the rear of the router in for 10
seconds, it will reset to the default, in case you
changed it to something else.
 
Back
Top