Linksys Printserver Question

  • Thread starter Thread starter autuminal
  • Start date Start date
A

autuminal

I have a HP 5510 all-in-one printer.

I purchased a Linksys PSUS4 print server and connected the printer to
it, so that I would have a network printer on my small 5 computer LAN.

I followed the installation instructions, exactly as described in the
Linksys guide and nothing works.

I've searched the internet for help with the installation, but
everyone says the installation software, enclosed with the server, is
junk and will not work.

Has anyone installed this printserver, and if so, could you point me
in the direction for information about how to set it up?

Thanks
 
Take a look for a solution to your problem in the Community Forums on the
Linksys Site. I had the same problem using their wireless print server. A
person posted directions on how to manually set up the print server and I
was able to get it working.

Steve
 
Try reading through Bruce Sanderson's guide at:
http://members.shaw.ca/bsanders/Printing to Print Server device.htm
Click to expand...


Thanks to all for your suggestions.

I was fortunate to be able to contact a very knowledgeable technical
rep at Linksys, and she walked my through the setup of a static IP
address for the server.

Now, it works, perfectly with the printer as well as a very nice 4
port switch connected to a Linksys Router.

Contrary to what many have posted on various forums, the printserver
does work with an all-in-one printer, like my HP 5510. You may not
have all the features, through the server, but you can sure print with
it.
 
Back
Top