Limited Connection on WRT54GX W/SRX Router

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Hello, Has anyone had problems with connecting the Lynksys Router wireless? I
have spent 3 hours on line with lynksys trying to get a connection other than
limited and no luck yet. I have changed router settings, removed security and
so on. I tried to install the software and it came up with the following
error; WRT54Gx SETUP WIZARD run time error '75': path/file access error. The
wireless connections anyway i set them up do not get a good connection. Found
lots of other Problems With Vista Beta 2 that need fixing such as my
Microsoft offline Player for my training, cant use it.. the list is getting
large but I really could use help with the router problems now if anyone has
a plan. Thank you.
 
I'm using a linksys router and I had this problem too at the beginning. Hope
my method works on your machine: first go to network centre->view status of
your connection->properties, uncheck IPv6 and the last two Link-Layer xxxx
protocols, go to the properties of IPv4 protocol, manually configure your IP
address (usually is 192.168.1.10x for IP address ,255.255.255.0 for subnet
mask, 192.168.1.1 for default gateway, you may need to figure out the DNS
server address from some other working computer on the network..) Apply your
settings and wait for vista to connect automatically, if it still doesn't
work, disable the IPv4 protocol, apply, and re-enable it.

It works fine for now...but it keeps popping up the IP conflict warning on
my machine,though it doesn't affect the internet connection
 
Hello Alex, Thanks for the reply. I did the entire address deal. on my
wireless side. It wont go. I am going to go in and change the router settings
and then change back as well as the settings on this machine again and try a
reboot. Or maybe I should just kill the wireless and then start over router
and al?? Any more ideas? thanks again
 
I also had that problem. I have a linksys router and modem in one. I had
limited connectivity errors with both the cable and the wireless. When I did
an upgrade. After I reinstalled Windows clean, my cable worked, but not the
wireless. When I manually configure the IP address it works temporarily then
it a no go. I'll let you know if I figure it out.
 
Back
Top