LCD Monitor Problem

  • Thread starter Thread starter LordOfNoldor
  • Start date Start date
L

LordOfNoldor

First of all I'm a newbie and since this is my first message I want to
say hello to everyone.
I got an lcd monitor as a present which is Dell E156FPb. I was a CRT
monitor user and I have to say I'm not satisfied with the visual
quality of this lcd. I tried monitor calibration tools but couldn't get
the comfortable view from it. There's no gamma control in OSD menu
(only brightness and contrast) and the monitor is using analog cable to
connect. My graphics card is Nvidia 7600GS, I've also tried tweaking
from graphic cards but my problem persists. The colours are much better
than the crt monitor but the problem is contrast, brightness and gamma.

I can't balance them(I think). I was wondering if there is anyone using
this monitor and could give me an advice or perhaps telling me the
optimal settings for these. Or maybe someone having any suggestions?
Please don't tell me to buy an hardware calibrator because they're too
expensive=)
Thanks in advance

P.S My English may not be so good, I tried me best...
 
LordOfNoldor said:
First of all I'm a newbie and since this is my first message I want to
say hello to everyone.
I got an lcd monitor as a present which is Dell E156FPb. I was a CRT
monitor user and I have to say I'm not satisfied with the visual
quality of this lcd. I tried monitor calibration tools but couldn't get
the comfortable view from it. There's no gamma control in OSD menu
(only brightness and contrast) and the monitor is using analog cable to
connect. My graphics card is Nvidia 7600GS, I've also tried tweaking
from graphic cards but my problem persists. The colours are much better
than the crt monitor but the problem is contrast, brightness and gamma.
Click to expand...


Did the monitor come with a "drivers" CD?
If so, install them
 
LordOfNoldor said:
CBFalconer yazdi:

Are you joking or what? Read the first post
Click to expand...

No, I am not joking. Read the following sig. (the portion after
the "-- " marker) and the referenced URLs. Then read the following
references also:

Some informative links:
<http://www.catb.org/~esr/faqs/smart-questions.html>
<http://www.caliburn.nl/topposting.html>
<http://www.netmeister.org/news/learn2quote.html>
<http://cfaj.freeshell.org/google/> (taming google)
<http://members.fortunecity.com/nnqweb/> (newusers)

--
If you want to post a followup via groups.google.com, ensure
you quote enough for the article to make sense. Google is only
a poor interface to usenet. There is no reason to assume your
readers can, or ever will, see any previous articles.
More details at: <http://cfaj.freeshell.org/google/>
Also see <http://www.safalra.com/special/googlegroupsreply/>
 
CBFalconer yazdi:
No, I am not joking. Read the following sig. (the portion after
the "-- " marker) and the referenced URLs. Then read the following
references also:

Some informative links:
<http://www.catb.org/~esr/faqs/smart-questions.html>
<http://www.caliburn.nl/topposting.html>
<http://www.netmeister.org/news/learn2quote.html>
<http://cfaj.freeshell.org/google/> (taming google)
<http://members.fortunecity.com/nnqweb/> (newusers)

--
If you want to post a followup via groups.google.com, ensure
you quote enough for the article to make sense. Google is only
a poor interface to usenet. There is no reason to assume your
readers can, or ever will, see any previous articles.
More details at: <http://cfaj.freeshell.org/google/>
Also see <http://www.safalra.com/special/googlegroupsreply/>
Click to expand...

Ok I got your point now. I am a newbie and I think that is obvious from
my posts. Thank you for your support.
 
LordOfNoldor said:
CBFalconer yazdi: .... snip on quoting etc. ...

Ok I got your point now. I am a newbie and I think that is obvious
from my posts. Thank you for your support.
Click to expand...

Much better. You still need to learn to snip.

--
<http://www.cs.auckland.ac.nz/~pgut001/pubs/vista_cost.txt>

"A man who is right every time is not likely to do very much."
-- Francis Crick, co-discover of DNA
"There is nothing more amazing than stupidity in action."
-- Thomas Matthews
 
First of all I'm a newbie and since this is my first message I want to
say hello to everyone.
I got an lcd monitor as a present which is Dell E156FPb. I was a CRT
monitor user and I have to say I'm not satisfied with the visual
quality of this lcd. I tried monitor calibration tools but couldn't get
the comfortable view from it. There's no gamma control in OSD menu
(only brightness and contrast) and the monitor is using analog cable to
connect. My graphics card is Nvidia 7600GS, I've also tried tweaking
from graphic cards but my problem persists. The colours are much better
than the crt monitor but the problem is contrast, brightness and gamma.

I can't balance them(I think). I was wondering if there is anyone using
this monitor and could give me an advice or perhaps telling me the
optimal settings for these. Or maybe someone having any suggestions?
Please don't tell me to buy an hardware calibrator because they're too
expensive=)
Thanks in advance

P.S My English may not be so good, I tried me best...
Click to expand...


Some LCDs can't be tweaked well enough to offer good
greyscale perceptions, let alone the lower contrast than a
good CRT. The specific use of the monitor may determine if
this is really a problem.

Do you have the latest video driver for the 7600GS? It
might offer more settings than an old driver, though I
would've thought any driver shipping with one would be new
enough to offer all available settings.

You are a bit vague only telling us the problem is contrast,
brightness and gamma. What is the exact goal you can't
reach? Due to the particular type of panel the LCD used, it
may be that you will never get close to a true black unless
all the other colors are far too dark. Similarly there may
be some kind of flaws with your CRT (just different flaws),
that you get used to over time.

Are you using a good image to try to balance them, something
not with a lot of colors but with a lot of shades (greyscale
images are usually better for this purpose). Even then,
ultimately it can be a choice of whether to emphasize more
the perception of all grey scales or to go (towards) maximum
contrast. Your particular monitor may simply lack the range
you want for your uses.
 
Back
Top