Label Report doesn't print a full page

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

When printing label reports on 3 across, 10 down label pages, Access only prints 27 labels, leaving the 10th line blank. It does not skip labels, just goes to the next page. I have checked all definitions in the computer for the labels I use - all are correct. If I print from Word, this is not a problem - Word prints all labels. I would like to be able to print from Access without wasting 3 labels per page. Suggestions?
 
Check the top and bottom margins. They should probably add up to 1". Many
ink printers can't print closer than .6" to the bottom. This would require
the top margin to be .4" or less. If you shorten the top margin, you may
need to move all the controls on your report down about .1" to keep the
alignment correct on the labels.

--
Duane Hookom
MS Access MVP


Owl's Hill said:
When printing label reports on 3 across, 10 down label pages, Access only
Click to expand...
prints 27 labels, leaving the 10th line blank. It does not skip labels,
just goes to the next page. I have checked all definitions in the computer
for the labels I use - all are correct. If I print from Word, this is not a
problem - Word prints all labels. I would like to be able to print from
Access without wasting 3 labels per page. Suggestions?
 
Back
Top