KMODE_EXCEPTION_NOT_HANDLED (0x1E)
This is a very common bug code. Usually the exception address pinpoints the
driver or function that caused the problem. Always note this address as
well as the link date of the driver or image that contains this address. A
common error is exception code 0x80000003. This error means a hard-coded
breakpoint or assertion was hit, but the system was booted with the /NODEBUG
switch. This problem should not occur very often. If it occurs repeatedly,
make sure a debugger is connected and the system is booted with the /DEBUG
switch.
On non-Intel systems, if the address of the exception is 0XBFC0304, the bug
code is the result of a cache-parity error on the CPU. If the problem
reoccurs frequently, contact the hardware manufacturer.
Parameters:
1 - The exception code that was not handled
2 - The address at which the exception occurred
3 - Parameter 0 of the exception
4 - Parameter 1 of the exception
Here's 3 good articles to learn how to debug. Hope this will help.
Q183169 - Possible Resolutions to Stop 0x0A, 0x01E, 0x050:
http://support.microsoft.com/directory/article.asp?ID=KB;EN-US;Q183169
Windows NT Kernel Debugging Resources
http://www.win2000mag.com/Articles/Index.cfm?ArticleID=5132
Using Microsoft's x86 Kernel Debugger
http://www.win2000mag.com/Articles/Index.cfm?ArticleID=5131
Demystifying the 'Blue Screen of Death'
http://www.microsoft.com/TechNet/winnt/bsod.asp
Regards,
/Jimmy