KMODE EXCEPTION NOT HANDLED ...CPQSS.SYS...

  • Thread starter Thread starter ralph
  • Start date Start date
R

ralph

getting bso screen after bios boot, tried safe mode in all versions, same
thing,

tried w2000 adv svr repair, same thing

tried last know good, same thing

cpqss.sys...is a compaq proliant system mgmt controller driver...

hardware checks out,

how can I disable this file from running at startup?

I can not seem to get into the c-drive to search out this driver,

i'd like to disable it...

any assistance would be appreciated...
 
Try loading the controller driver from floppy. For the floppy to
successfully boot Windows 2000 the disk must contain the "NT" boot sector.
Format a diskette (on a Windows 2000 machine, not a DOS/Win9x, so the "NT"
boot sector gets written to the floppy), then copy ntldr, ntdetect.com, and
boot.ini to it. Edit the boot.ini to give it a correct ARC path for the
machine you wish to boot.


In order for this to work you'll want to change the arc path in boot.ini
from multi syntax to scsi syntax to indicate that Windows 2000 will load a
boot device driver and use that driver to access the boot partition. Then
also copy the correct manufacturer scsi driver to the floppy but renamed to
ntbootdd.sys


Something like this below;


[boot loader]
timeout=10
default=scsi(0)disk(0)rdisk(0)partition(1)\WINNT
[operating systems]
scsi(0)disk(0)rdisk(0)partition(1)\WINNT="Windows 2000 0,1"
scsi(0)disk(0)rdisk(0)partition(2)\WINNT="Windows 2000 0,2"
scsi(0)disk(1)rdisk(0)partition(1)\WINNT="Windows 2000 1,1"
scsi(0)disk(1)rdisk(0)partition(2)\WINNT="Windows 2000 1,2"


--

Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect
 
Back
Top