G
Geddy Lee
Hi everyone,
I tried asking this question in the Hardware room but didn't receive any
help or answer to the question. Maybe I'll have more luck here.
I have a little question/problem. I have the above mentioned Mainboard. I am
using the AMD Barton 2500+ CPU. The MB is supposed to be capable of running
at 333mhz for the FSB, and according to my jumpers; they are correctly set
at 1-2 and 1-2 respectively. HOWEVER; when I run my computer up, the page
reads only 166Mhz and not 333FSB. How do I get it up to the 333FSB? I read
the manual butit has not brought me any further. I have the feeling that it
is a simple solution
but cannot seem to find it. I thought that if I changed the Bios settings,
that that would do the trick; but the BIOS only runs up to 232Mhz for the
CPU FSB, so I assume that that is not the solution. All help would be more
than greatly appreciated.
GL
I tried asking this question in the Hardware room but didn't receive any
help or answer to the question. Maybe I'll have more luck here.
I have a little question/problem. I have the above mentioned Mainboard. I am
using the AMD Barton 2500+ CPU. The MB is supposed to be capable of running
at 333mhz for the FSB, and according to my jumpers; they are correctly set
at 1-2 and 1-2 respectively. HOWEVER; when I run my computer up, the page
reads only 166Mhz and not 333FSB. How do I get it up to the 333FSB? I read
the manual butit has not brought me any further. I have the feeling that it
is a simple solution
but cannot seem to find it. I thought that if I changed the Bios settings,
that that would do the trick; but the BIOS only runs up to 232Mhz for the
CPU FSB, so I assume that that is not the solution. All help would be more
than greatly appreciated.
GL