Joining NT Domain Behind NAT

  • Thread starter Thread starter Ashwin Philar
  • Start date Start date
A

Ashwin Philar

Hi!!

We have a wired LAN at our site. Recently, I have setup a WLAN, the
WLAN router connects the LAN and the WLAN.

The WLAN clients connect to the router via VPN. This router performs
NAT between the wireless and wired interfaces because the wired LAN
administrators do not want us to use their IP addresses on the
wireless side.

I want to join these wireless clients to the domain on the wired side.

Can this be done?

Thanks,
Ashwin
 
We have a wired LAN at our site. Recently, I have setup a WLAN, the
WLAN router connects the LAN and the WLAN.

The WLAN clients connect to the router via VPN. This router performs
NAT between the wireless and wired interfaces because the wired LAN
administrators do not want us to use their IP addresses on the
wireless side.

I want to join these wireless clients to the domain on the wired side.

Can this be done?
Click to expand...

Yes.

And since you didn't ask the question you really want answered, the
answer is "WINS or a properly configured LMHosts file with the domain
controller designation."

Jeff
 
Back
Top