J
JSPIPE
I have a problem with jerky motion that i would describe as ' 2steps forward
1 step back'.
It can affect a single object moving against a static background or the full
screen picture
in both vertical and horizontal motion.
Anything more than gentle motion is jerky.
For example: a race car approaching a corner, perspective means low speed
down
the screen and the car is in clear focus then, as the car turns into the
corner, it
immediately becomes a blur as this '2 steps forward 1 step back' motion
kicks in.
If the camera follows the car round the corner the car can remain clear and
the
background become jerky.
The picture quality is good apart from this jerky motion.
This problem first appeared in games, but has now become so
bad it affects USB tv and internet streaming as well.
It appears with different monitors.
It appears with both on-board graphics and PCIe card.
Changing screen resolution and refresh rate has no effect.
I have tried different FSB rates between 200 and 250 Mhz,
setting RAM/FSB to 1:1, both MIPS options and PCI latency settings.
I have run Prime95 in the background when the CPU temp rose from
less than 40c to above 60c.
Installing SP3 and the 2008 Dx update made no change.
The DX diag tests run correctly.
Nothing that i have done makes any difference to this condition.
All this time the computer has been stable with no freezing or errors.
Help needed.
Thanks
JSP
1 step back'.
It can affect a single object moving against a static background or the full
screen picture
in both vertical and horizontal motion.
Anything more than gentle motion is jerky.
For example: a race car approaching a corner, perspective means low speed
down
the screen and the car is in clear focus then, as the car turns into the
corner, it
immediately becomes a blur as this '2 steps forward 1 step back' motion
kicks in.
If the camera follows the car round the corner the car can remain clear and
the
background become jerky.
The picture quality is good apart from this jerky motion.
This problem first appeared in games, but has now become so
bad it affects USB tv and internet streaming as well.
It appears with different monitors.
It appears with both on-board graphics and PCIe card.
Changing screen resolution and refresh rate has no effect.
I have tried different FSB rates between 200 and 250 Mhz,
setting RAM/FSB to 1:1, both MIPS options and PCI latency settings.
I have run Prime95 in the background when the CPU temp rose from
less than 40c to above 60c.
Installing SP3 and the 2008 Dx update made no change.
The DX diag tests run correctly.
Nothing that i have done makes any difference to this condition.
All this time the computer has been stable with no freezing or errors.
Help needed.
Thanks
JSP