T
Twayne
Hi Jim, Js and Nepatsfan
The URL you posted is coming up 404 not found for me right now, so I
can't get a look at it.
Have you accounted for:
Restore Points? Stored in the normally hidden System Volume
INformation, I believe.
PageFile reservation?
Differences between measurement methods? e.g. MB, Mb, 1000 vs 1024,
etc.? The latter can really add up to some large differences with large
drives if the programs you use don't use the same counting methodology.
Many programs reserve as yet unoccupied disk space for their own
explicit use which is usually not accounted for in space calculations.
There are too many of them to guess at and you gave no idea what's on
your system. Many of the reservations are in the order of 10% to 15% of
the hard disk capacity so they can add up fast, too.
If the gap is 16 vs 103 though, I think I'd take a look at the "b" vs
"B" situation. "b" is bits, "B" is bytes. Beware mixing the two up.
Almost all the time such discrepancies are explained by one or more of
the above.
Perhaps if you gave more specific information someone could make a
closer guess at what the situation is. Just how large is the
discrepancy and what is the size of the hard drive? How much is
used/free, etc.?
I ran a scan with JDiskReport and it showed the 16GB that I knew
about.
Windows explorer and properties show 103 being used
I have put a screenshot of the two reports at
http://www.pipebendersinc.com/size.jpg (cannot attach here)
Still Stuck. Looks like window is confused. Any way to have it go
and look up each file in the directory and check the locations etc. I
was hoping scandisk or defrag would figure that out but they didn't
Tom
The URL you posted is coming up 404 not found for me right now, so I
can't get a look at it.
Have you accounted for:
Restore Points? Stored in the normally hidden System Volume
INformation, I believe.
PageFile reservation?
Differences between measurement methods? e.g. MB, Mb, 1000 vs 1024,
etc.? The latter can really add up to some large differences with large
drives if the programs you use don't use the same counting methodology.
Many programs reserve as yet unoccupied disk space for their own
explicit use which is usually not accounted for in space calculations.
There are too many of them to guess at and you gave no idea what's on
your system. Many of the reservations are in the order of 10% to 15% of
the hard disk capacity so they can add up fast, too.
If the gap is 16 vs 103 though, I think I'd take a look at the "b" vs
"B" situation. "b" is bits, "B" is bytes. Beware mixing the two up.
Almost all the time such discrepancies are explained by one or more of
the above.
Perhaps if you gave more specific information someone could make a
closer guess at what the situation is. Just how large is the
discrepancy and what is the size of the hard drive? How much is
used/free, etc.?