ixfr / axfr zone transfert

  • Thread starter Thread starter Emeric
  • Start date Start date
E

Emeric

Hi,

I have a primary dns under unix bind 8.2.2 and my secondary dns is under
w2ksp4.
My problem is that the ms dns, wants to do ixfr zone transfer with my bind
dns.

It's possible to disabled ixfr and only do axfr zone transfer? Or what can i
do to resolve my problem.
Sometimes, i have errors in my eventwiever, and the zone transfer isn't
possible.

Thank's for your help !
Best regards,
Emeric

Errors are :

id 3000 or 9999
3000- The DNS server is logging numerous run-time events. For information
about these events, see previous DNS Server event log entries. To prevent
the DNS Server from clogging server logs, further logging of this event and
other events with higher Event IDs will now be suppressed.
9999- DNS Server has encounters numerous run-time events. These are usually
caused by the reception of bad or unexpected packets, or from problems with
or excessive replication traffic. The data is the number of suppressed
events encountered in the last 15 minute interval.

than
id6522
A more recent version, version %1 of zone %2 was found at DNS server at %3.
Zone transfer is in progress.

than i have 3 event
id 6524
Invalid response from master DNS server at %2 during attempted zone transfer
of zone %1. Check The DNS server at %2 and insure that it is authoritative
for this zone. This can be done by viewing or updating the list of
authoritative servers for the zone. When using the DNS console, select zone
%1 Properties at server %2 and click the Name Servers tab. If needed, you
can add or update this server in the list there. As an alternative solution,
you could also modify settings in the Zone Transfer tab to allow transfer of
the zone to this and other DNS servers.
 
Hello Emeric,

It is not possible to configure the Windows 2000 DNS Server to perform a
full zone transfer
all the time (AXFR) and disable incremental zone transfer (IXFR)

--
Regards,
Mohanchand Koduri [MSFT]

This posting is provided "AS IS" with no warranties, and confers no rights.
OR
If you wish to include a script sample in your post please add "Use of
included
script samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm"
 
Not really related, but you should probably upgrade that 8.2.2 to something
like 8.3+ or 9+.
 
Back
Top