It looks like my ATI R9700pro is dying <sniff>

  • Thread starter Thread starter Ken Maltby
  • Start date Start date
K

Ken Maltby

It still works for 2D but as soon as the 3D warms up
it locks up, with or with out VPU Recover. At first I
thought it was FarCry but it's happening whenever I
use any 3D. If the card is "cold" it may last a few min
in 3D mode, but that time gets shorter and shorter each
subsequent attempt.

Maybe overclocking (just to R9800 speeds) has taken
its toll? Can't believe it is heat related, at least not the GPU
as that has a waterblock.

I sorta reminds me of when I was first trying to get one of
these boards to work in a A7N8X, when they both were
new. This A7N8X and R9700 Pro have been working great
together for some time now. It's even been some time sense
the last MB BIOS and video driver updates. Now; for no
apparent reason, it is dying in 3D apps.

Any ideas so I don't have to kick the kid off my system with
the R9800 pro? At least until I can figure whether to replace it
or find some way to limp along until the next cards are out.

Better Luck;
Ken
 
Ken Maltby said:
It still works for 2D but as soon as the 3D warms up
it locks up, with or with out VPU Recover. At first I
thought it was FarCry but it's happening whenever I
use any 3D. If the card is "cold" it may last a few min
in 3D mode, but that time gets shorter and shorter each
subsequent attempt.

Maybe overclocking (just to R9800 speeds) has taken
its toll? Can't believe it is heat related, at least not the GPU
as that has a waterblock.

I sorta reminds me of when I was first trying to get one of
these boards to work in a A7N8X, when they both were
new. This A7N8X and R9700 Pro have been working great
together for some time now. It's even been some time sense
the last MB BIOS and video driver updates. Now; for no
apparent reason, it is dying in 3D apps.

Any ideas so I don't have to kick the kid off my system with
the R9800 pro? At least until I can figure whether to replace it
or find some way to limp along until the next cards are out.

Better Luck;
Ken
Click to expand...

P.S. This is getting weirder and weirder, replaced the card with
a R8500 (orig. 64meg model) and still am locking up in 3D.
I can't figure out what, on the motherboard, would be effecting
just the 3D performance.

I have another A7N8X board (a A7N8X-E deluxe) handy,so I'll
be trying that next.
 
JAD said:
you have looked at Direct X as a possible problem?
Click to expand...

Checked what I could, can't go back from 9b to say 8.
I'll try and reinstall it (9b) but I don't know how it could
just "go bad", I haven't added anything that would have
changed it since I installed FarCry and that was fine until
I reached the hole in the carrier.

Thanks for the tip;
Ken
 
Ken said:
P.S. This is getting weirder and weirder, replaced the card with
a R8500 (orig. 64meg model) and still am locking up in 3D.
I can't figure out what, on the motherboard, would be effecting
just the 3D performance.

I have another A7N8X board (a A7N8X-E deluxe) handy,so I'll
be trying that next.
Click to expand...


I'd look at possibly a heat problem. Clean out any dust buildup with a
compressed air can - check your temps with a utility such as Motheboard
Monitor.
Try running it with the case off, and perhaps even a small fan blowing on it
with the case off, to see if that makes it more stable.
 
I'd look at possibly a heat problem. Clean out any dust buildup with a
compressed air can - check your temps with a utility such as Motheboard
Monitor.
Click to expand...

See if it hangs in prime95, which stesses the cpu but not the vidcard.

rms
 
P.S. This is getting weirder and weirder, replaced the card with
a R8500 (orig. 64meg model) and still am locking up in 3D.
I can't figure out what, on the motherboard, would be effecting
just the 3D performance.

I have another A7N8X board (a A7N8X-E deluxe) handy,so I'll
be trying that next.
Click to expand...

Maybe the AGP slot is on its way out?
 
blah said:
Maybe the AGP slot is on its way out?
Click to expand...

Ok, been up all night but it works with the A7N8X-E, so it
was not the R9700 Pro. Guess I'll start another thread over
in the ASUS NG. Thanks everyone, maybe I'll get the old MB
working someday. Still seems odd that the only thing that failed
was the 3D graphics support (whatever that would be) on the MB.
The AGP sounds like a good place to start.

Thanks again;
Ken
 
clear the CMOS unplug and short the jumper


Ken Maltby said:
Ok, been up all night but it works with the A7N8X-E, so it
was not the R9700 Pro. Guess I'll start another thread over
in the ASUS NG. Thanks everyone, maybe I'll get the old MB
working someday. Still seems odd that the only thing that failed
was the 3D graphics support (whatever that would be) on the MB.
The AGP sounds like a good place to start.

Thanks again;
Ken
Click to expand...
 
But that's great news! I wish mine would die ;-)

Then I could buy a new 9800 Pro for such a bargain price that you see
nowadays. I can't possibly justify that whilst my 9700 Pro is working!

Chip
 
Ken Maltby said:
It still works for 2D but as soon as the 3D warms up
it locks up, with or with out VPU Recover. At first I
thought it was FarCry but it's happening whenever I
use any 3D. If the card is "cold" it may last a few min
in 3D mode, but that time gets shorter and shorter each
subsequent attempt.

Maybe overclocking (just to R9800 speeds) has taken
its toll? Can't believe it is heat related, at least not the GPU
as that has a waterblock.

I sorta reminds me of when I was first trying to get one of
these boards to work in a A7N8X, when they both were
new. This A7N8X and R9700 Pro have been working great
together for some time now. It's even been some time sense
the last MB BIOS and video driver updates. Now; for no
apparent reason, it is dying in 3D apps.

Any ideas so I don't have to kick the kid off my system with
the R9800 pro? At least until I can figure whether to replace it
or find some way to limp along until the next cards are out.

Better Luck;
Ken
Click to expand...
How old is the solution your cooling with? I had to replace mine at about 6
months and noticed a 10 degree temp difference.
 
BK24 said:
How old is the solution your cooling with? I had to replace mine at about 6
months and noticed a 10 degree temp difference.
Click to expand...
A few months, as I made some changes to my setup.
Do you mean that you found a solution that lowered your
temps 10 degrees or that they went up 10° ?

Luck;
Ken
 
Back
Top