ISA Plug and Play Ne2000

  • Thread starter Thread starter rerfurt
  • Start date Start date
R

rerfurt

I have problems building an image that can detect my Realtek 8019AS
Ne2000 compatible network ISA card.

Which components do I need to perform full plug and play on the ISA bus
?

My CPU board is a Geode based Kontron MOPSlcdLX PC104.

Regards

Rasmus
 
Rasmus,

Try generic component - "NE2000 Compatible ISAPNP Ethernet Adapter (Generic)".
The best though would be if you componentize your Realtek driver (import INF) and include it in pre-FBA image.
 
I did include the "NE2000 Compatible ISAPNP Ethernet Adapter (Generic)"
and also the PCI - ISA Bridge, ISA Plug and play enumerator etc.

Today I installed first XP Pro to try and detect the board, secondly
W2K - with no success.

I have tested the board in my desktop computer using a PC104 -> ISA
converter board and W2k detected the ethernet board straight away.

Later I attempted to detect the board using a much older Pc104 CPU
board, the Kontron MOPS/686 board - with no success.

Does anyone have any thoughts on what might be wrong here ?

Regards

Rasmus
 
rerfurt said:
I did include the "NE2000 Compatible ISAPNP Ethernet Adapter (Generic)"
and also the PCI - ISA Bridge, ISA Plug and play enumerator etc.

Today I installed first XP Pro to try and detect the board, secondly
W2K - with no success.

I have tested the board in my desktop computer using a PC104 -> ISA
converter board and W2k detected the ethernet board straight away.

Later I attempted to detect the board using a much older Pc104 CPU
board, the Kontron MOPS/686 board - with no success.

Does anyone have any thoughts on what might be wrong here ?
Click to expand...
It's broken? If it won't work under XPPro, it won't work under Embedded.
 
Adora said:
It's broken? If it won't work under XPPro, it won't work under Embedded.
Click to expand...

Adora, KM - tanks,

I guess you are right, broken would be the obvoius conclusion. I am/was
currently working with Kontron to sort that part out.

Does anyone have positive experience with a similar setup and XP
embedded ?

Regards

Rasmus
 
Back
Top