inthehand adoce.net dll data loss

  • Thread starter Thread starter Bruce
  • Start date Start date
B

Bruce

thanks very much for this great product! has helped me in alot of ways.

right now having the following issues:

1) data loss. while app remains open, data freshly stored in db seems
present and can be read, but when app has a problem, data supposedly stored
is missing. worse, db can sync successfully and then still lose data after
syncing. this data loss appears to propagate back to pc through sync.
looked through inthehand forums and found advice on not keeping connections
open and using dispose instead of "nothing" I have these problems and will
change. just wanted to know if even these effects could be caused by the
conn and dispose issues.

2) possibly not a software problem. symbol 8100 strongarm ppc2002 is usable
for about two hours, then screen goes blank, and cant be turned on. after a
few minutes rest, will turn on. seems main bat power goes down to 50%,
while backup remains 100%, this is one of the "problems" above, and I
thought data already saved would survive. this may be a hardware or battery
issue, but just wanted to ask if there could be something getting stuck in
activesync that could be fouling up the machine.

3) as a quick workaround, we exit the app, as I thought this would force
somewhow pending data to be stored. doesnt always work. It also seems
something is not quite right after leaving the app, and perhaps something is
still open. btw I have seen remnants in "running programs" after normal
app close, in several applications.


thanks for any help
 
Back
Top