internal scsi

  • Thread starter Thread starter john
  • Start date Start date
J

john

i installed a adaptec 2906 scsi interface. it works.
external drives work. when i plug in an internal drive,
device manager sees it. but i can not access it through
control panel.
 
Most PCI based SCSI host interface adapters have an internal BIOS
configuration which we can set several options (IE: Device ID speed, which
device to boot from etc...)

One option on most Adaptec interface adapter I have seen is to tell the unit
which SCSI port(s) to enable. I am not familiar with the 2609 but you
should check on Adaptec's web site www.adaptec.com

Y.
 
Make sure the internal drive has a unique ID number (1 through 6). Also is
the drive formatted?? Also check the termination scheme.
 
Back
Top