Intermittent Report Failure

  • Thread starter Thread starter Randy Kilgore
  • Start date Start date
R

Randy Kilgore

Hello all,
I have an Access 2000 application loaded in 12 different
client offices which uses an Access 2000 runtime. Several
offices have noted reports which act like they have gone
to the printer but nothing prints. Then, they will run
the report again and it will print out. It is never
consistant and it is NOT a No Data to print issue as even
if there is no data the report will still print out
something. Has anyone ran into this? I have noticed that
both client's who have experienced this behavior are
running Windows XP machines with Access XP installed.

Please advise and thanks for any help.
randy
 
Hi Randy,

Check the printer drivers. Set the machines to a completely new printer
driver as the default and see what result you get. If it works with a
different printer driver then the issue is more related to needing an
updated printer driver or a printer driver that is more compatiable.

I hope this helps! If you have additional questions on this topic, please
respond back to this posting.


Regards,

Eric Butts
Microsoft Access Support
(e-mail address removed)
"Microsoft Security Announcement: Have you installed the patch for
Microsoft Security Bulletin MS03-026? If not Microsoft strongly advises
you to review the information at the following link regarding Microsoft
Security Bulletin MS03-026
<http://www.microsoft.com/security/security_bulletins/ms03-026.asp> and/or
to visit Windows Update at <http://windowsupdate.microsoft.com/> to install
the patch. Running the SCAN program from the Windows Update site will help
to insure you are current with all security patches, not just MS03-026."

This posting is provided "AS IS" with no warranties, and confers no rights

--------------------
| Content-Class: urn:content-classes:message
| From: "Randy Kilgore" <[email protected]>
| Sender: "Randy Kilgore" <[email protected]>
| Subject: Intermittent Report Failure
| Date: Tue, 6 Jul 2004 10:13:51 -0700
| Lines: 14
| Message-ID: <[email protected]>
| MIME-Version: 1.0
| Content-Type: text/plain;
| charset="iso-8859-1"
| Content-Transfer-Encoding: 7bit
| X-Newsreader: Microsoft CDO for Windows 2000
| Thread-Index: AcRjfJwcHxsA1MeYSOqUyC79u+AQLg==
| X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4910.0300
| Newsgroups: microsoft.public.access.reports
| Path: cpmsftngxa06.phx.gbl
| Xref: cpmsftngxa06.phx.gbl microsoft.public.access.reports:142044
| NNTP-Posting-Host: tk2msftngxa11.phx.gbl 10.40.1.163
| X-Tomcat-NG: microsoft.public.access.reports
|
| Hello all,
| I have an Access 2000 application loaded in 12 different
| client offices which uses an Access 2000 runtime. Several
| offices have noted reports which act like they have gone
| to the printer but nothing prints. Then, they will run
| the report again and it will print out. It is never
| consistant and it is NOT a No Data to print issue as even
| if there is no data the report will still print out
| something. Has anyone ran into this? I have noticed that
| both client's who have experienced this behavior are
| running Windows XP machines with Access XP installed.
|
| Please advise and thanks for any help.
| randy
|
 
Back
Top