Installing a C3180 printer

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

How do I get my HP C3180 printer installed and working with Windows Vista? I
have tried for over 1 week now. HP was no help, and finally bailed out on
me. Any ideas or suggestions would be greatly appreciated.
 
I recently installed my HP C4180 (probably similar to the C3180), using the
installation disk & following the instructions that came with the printer.
During the course of the installation, it will check the status of your
software and look for relevant driver updates on the HP web site. It was
fairly straightforward. They make a strong point about following the steps
exactly; e.g. not connecting the printer to the computer until Setup tells
you do, etc. Do you have the installation disk and the Basics Guide that
come with the printer?
 
Evelyn H said:
How do I get my HP C3180 printer installed and working with Windows Vista? I
have tried for over 1 week now. HP was no help, and finally bailed out on
me. Any ideas or suggestions would be greatly appreciated.
Click to expand...


I have the same problem and have wasted a great deal of time with HP support
on this issue.

There installer and update program for this printer do not work on Vista
however they still claim it is Vista Compatible.

The installer will get to %96 and hang.

The drivers are installed and you can use the printer until you either turn
off the printer or reboot the computer.

Then the drivers start to install all over again.

HP support has not been very helpful and as far as I can tell none of the
techs I have worked with have elevated the issue to fix the all in one
program or to properly diagnose whe root cause of the failure.
 
Back
Top