Installation Upgrade fail

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Everytime i installed Windows Visata, the whole will be done expect the
upgrade part, because the goes always black and never come to normal. And
when switch off it will say that the installation was not successful. and It
will unsinstall it.

TOSHIBA SATELLITE A105-S4134
Intel Core Duo
T2400 @ 1.83GHz
1.83GHz, 1.99GB of RAM
HDD 120GB
 
I have the same Issue... I've tried 2 different burns of the RC1 disc in 3+
attempts, once was an upgrade from XP Pro, once as a clean install and the
last being a clean install on a new re-download of the ISO...

DVD loads up fine from Windows to fresh Partiton, or as a Boot Disc. Will do
the init reboot (after files copy, then gets like 20% thru expanding files),
then when it gets to "finalizing the setup" (last bullet point) the green bar
gets to 70%ish (what looks like 80% overall), then the screen turns totally
off and the keyboard stops responding (caps lock doesnt dis/engadge... no
CTRL+ALT+DEL reaction, cept occational HDD or DVD ping).... on reboot, setup
rollback is the only Vista option left...

Toshiba Satellite A105-S4084
Intel Centrino Duo (Core Duo) 1.6GHz T2050, 533MHz FSB
1GB DDR2 677MHz RAM (2@512 SOIDIMM)
120GB 5400RPM SATA Drive (3 partitions, C:WinMCE 2005, E:Vista test
Partition, F:Docs/Files... D:DVD SuperMulti drive)
Intel Centrino A/B/G WiFi
Intel GMA950 Dynamic VRAM Graphics Adapter (8 to 128MB)
Internal DVD/CD Burner

Just an Idle note, it seems that the issue spans dual core Procs of Intel
and AMD... Jus a note...
 
Back
Top