Installation Error

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

When installation process attempts to copy setup files to disk this
terminates with error code 80004005. Anyone got any ideas please?
 
Sorry, this a stock answer:
try reburning the ISO at a low speed, 2x recommended, also do a CRC check on
the ISO to find out its integrity. Nero MD5 Verifier is a recommended
choice. If setup still fails, its likely a bad download.

I use the one from Ahead Nero
http://ww2.nero.com/nero6/eng/Nero_MD5_Verifier.html

Here are the MD5/CRC values for x86 or x64 depending on which every ISO you
downloaded:

x86
- File Size = 3.12 GB (3,355,598,848 bytes)
- CRC Value = 0x67E089E0
- MD5 Value = 0E733AB1A8E8FF9A8684FD3639332773
x64
- File Size = 4.01 GB (4,309,368,832 bytes)
- CRC Value = 0x48697711
- MD5 Value = E43502D0A15EADD551119D5639859E04

Paste the MD5 Checksum for either x64 or x86 depending on which one you want
check in Step 1, Step 2 - Browse to where you stored the ISO on your drive
and open it and it will automatically start the varification process and
generate the has in the third field, if it matches Step 1, then you are
safe.
--
--
Andre
Windows Connected | http://www.windowsconnected.com
Extended64 | http://www.extended64.com
Blog | http://www.extended64.com/blogs/andre
http://spaces.msn.com/members/adacosta
 
Thanks for this. I originally burnt the ISO @ 2x speed - think I'll try and
download again or else order the DVD !!
 
yea i had this same problem. download went smooth then the checksum went bad
T_T so now i'm redownloading again.
 
Hi, I had the same problem the best way to do it is by using Alcohool 120% to
mount the image and install from there. I only had this problem with the
32Bit version not the 64Bit. I downloaded 3 times and I always had the same
install eror.
then I tried that and it worked fine. I heard that you can put the install
files on your drive and install from there but I haven"t tried it.
 
Back
Top