install with sata dvd drive and HD

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I'm putting together a PC with a Plextor sata dvd drive and a Hitachi sata
hard drive. I never did that before. Will Vista (or xp for that matter) even
start to load with a sata dvd drive? At what point do I install a driver for
sata support. And do I still need a floppy drive for this? Thanks
 
That depends on the mobo, not the drives. If the mobo has the SATA drivers
in firmware then you will not need drivers unless you are using RAID.

Vista can see drivers on floppy, cd, or thumb drive. Having said that, I
still insist on having a floppy drive on all the systems I build. There are
still many uses for floppies. I use them constantly in installing legacy
systems in Virtual PC and Virtual Server. There are other uses such as BIOS
and other firmware flashing.
 
I am going to buy one of the new Intel Dual Core 2 processors as soon as they
are released. I was thinking of an Intel motherboard as well. If the drivers
are in the firmware then you are saying that the dvd drive and hard drive
will be recognized and no special drivers will be needed during instalation?
That would be great. Do you have any advice on a better motherboard?
 
Back
Top