Inaccessible_boot_device

  • Thread starter Thread starter Joe
  • Start date Start date
J

Joe

Could someone please help me out. After searching Google
and Microsoft site, I am unable to find any information.
I am attempting to set up a base image to be copied on to
a number of other workstations. After installing a clean
version of W2K, applying patches MS03-039 & 043, adding a
number of required apps. I had run SysPrep with the
following information

[Unattended]
OemSkipEula=Yes
KeepPageFile=1

[GuiUnattended]
OEMSkipWelcome=1
OEMSkipRegional=1
TimeZone=255
AutoLogon=Yes
AutoLogonCount=1
AdminPassword=

[UserData]
FullName=""
OrgName=""

[Identification]
Joinworkgroup="workgroup"

[RegionalSettings]
LanguageGroup=1
SystemLocale=00000c09
UserLocale=00000c09
InputLocale=00000c09

[TapiLocation]
CountryCode=61
Dialing=Tone
AreaCode=02

[Display]
BitsPerPel=24
Xresolution=1024
YResolution=768
Vrefresh=75

[Networking]
InstallDefaultComponents=No

[SysprepMassStorage]
Primary_IDE_Channel=%windir%\inf\mshdc.inf
Secondary_IDE_Channel=%windir%\inf\mshdc.inf
PCMCIA\*PNP0600=%systemroot%\inf\mshdc.inf
PCMCIA\KME-KXLC005-A99E=%systemroot%\inf\mshdc.inf
PCMCIA\_-NinjaATA--3768=%systemroot%\inf\mshdc.inf
PCMCIA\FUJITSU-IDE-PC_CARD-DDF2=%systemroot%
\inf\mshdc.inf
*AZT0502=%systemroot%\inf\mshdc.inf
PCI\CC_0101=%systemroot%\inf\mshdc.inf
PCI\VEN_10B9&DEV_5215=%systemroot%\inf\mshdc.inf
PCI\VEN_10B9&DEV_5219=%systemroot%\inf\mshdc.inf
PCI\VEN_10B9&DEV_5229=%systemroot%\inf\mshdc.inf
PCI\VEN_1097&DEV_0038=%systemroot%\inf\mshdc.inf
PCI\VEN_1095&DEV_0640=%systemroot%\inf\mshdc.inf
PCI\VEN_1095&DEV_0646=%systemroot%\inf\mshdc.inf
PCI\VEN_0E11&DEV_AE33=%systemroot%\inf\mshdc.inf
PCI\VEN_8086&DEV_1222=%systemroot%\inf\mshdc.inf
PCI\VEN_8086&DEV_1230=%systemroot%\inf\mshdc.inf
PCI\VEN_8086&DEV_7010=%systemroot%\inf\mshdc.inf
PCI\VEN_8086&DEV_7111=%systemroot%\inf\mshdc.inf
PCI\VEN_8086&DEV_2411=%systemroot%\inf\mshdc.inf
PCI\VEN_8086&DEV_2421=%systemroot%\inf\mshdc.inf
PCI\VEN_8086&DEV_7199=%systemroot%\inf\mshdc.inf
PCI\VEN_1042&DEV_1000=%systemroot%\inf\mshdc.inf
PCI\VEN_1039&DEV_0601=%systemroot%\inf\mshdc.inf
PCI\VEN_1039&DEV_5513=%systemroot%\inf\mshdc.inf
PCI\VEN_10AD&DEV_0001=%systemroot%\inf\mshdc.inf
PCI\VEN_10AD&DEV_0150=%systemroot%\inf\mshdc.inf
PCI\VEN_105A&DEV_4D33=%systemroot%\inf\mshdc.inf
PCI\VEN_1106&DEV_0571=%systemroot%\inf\mshdc.inf

I had tested that the base image works by completing a
boot up and logging in as a local admin. Then re-ran
SysPrep.

I then created a Ghost image using -z9 to create the
smallest file possible. When I transfered this image onto
an identical workstation the following error occurs on
booting. This error appears after the initial Bios setup.

STOP: 0x0000007B (0x818177F0, 0xC0000102, 0x00000000,
0x00000000) Inaccessible_boot_device.
 
This error sometimes happens if you put a ghost image on a
machine that has a different hard drive size. Did you
check the sizes of the disks when you were imaging? Even
if you have identical hardware, if the disk sizes are
different, you get the blue screen on boot.

Regards

Johnny
-----Original Message-----
Could someone please help me out. After searching Google
and Microsoft site, I am unable to find any information.
I am attempting to set up a base image to be copied on to
a number of other workstations. After installing a clean
version of W2K, applying patches MS03-039 & 043, adding a
number of required apps. I had run SysPrep with the
following information

[Unattended]
OemSkipEula=Yes
KeepPageFile=1

[GuiUnattended]
OEMSkipWelcome=1
OEMSkipRegional=1
TimeZone=255
AutoLogon=Yes
AutoLogonCount=1
AdminPassword=

[UserData]
FullName=""
OrgName=""

[Identification]
Joinworkgroup="workgroup"

[RegionalSettings]
LanguageGroup=1
SystemLocale=00000c09
UserLocale=00000c09
InputLocale=00000c09

[TapiLocation]
CountryCode=61
Dialing=Tone
AreaCode=02

[Display]
BitsPerPel=24
Xresolution=1024
YResolution=768
Vrefresh=75

[Networking]
InstallDefaultComponents=No

[SysprepMassStorage]
Primary_IDE_Channel=%windir%\inf\mshdc.inf
Secondary_IDE_Channel=%windir%\inf\mshdc.inf
PCMCIA\*PNP0600=%systemroot%\inf\mshdc.inf
PCMCIA\KME-KXLC005-A99E=%systemroot%\inf\mshdc.inf
PCMCIA\_-NinjaATA--3768=%systemroot%\inf\mshdc.inf
PCMCIA\FUJITSU-IDE-PC_CARD-DDF2=%systemroot%
\inf\mshdc.inf
*AZT0502=%systemroot%\inf\mshdc.inf
PCI\CC_0101=%systemroot%\inf\mshdc.inf
PCI\VEN_10B9&DEV_5215=%systemroot%\inf\mshdc.inf
PCI\VEN_10B9&DEV_5219=%systemroot%\inf\mshdc.inf
PCI\VEN_10B9&DEV_5229=%systemroot%\inf\mshdc.inf
PCI\VEN_1097&DEV_0038=%systemroot%\inf\mshdc.inf
PCI\VEN_1095&DEV_0640=%systemroot%\inf\mshdc.inf
PCI\VEN_1095&DEV_0646=%systemroot%\inf\mshdc.inf
PCI\VEN_0E11&DEV_AE33=%systemroot%\inf\mshdc.inf
PCI\VEN_8086&DEV_1222=%systemroot%\inf\mshdc.inf
PCI\VEN_8086&DEV_1230=%systemroot%\inf\mshdc.inf
PCI\VEN_8086&DEV_7010=%systemroot%\inf\mshdc.inf
PCI\VEN_8086&DEV_7111=%systemroot%\inf\mshdc.inf
PCI\VEN_8086&DEV_2411=%systemroot%\inf\mshdc.inf
PCI\VEN_8086&DEV_2421=%systemroot%\inf\mshdc.inf
PCI\VEN_8086&DEV_7199=%systemroot%\inf\mshdc.inf
PCI\VEN_1042&DEV_1000=%systemroot%\inf\mshdc.inf
PCI\VEN_1039&DEV_0601=%systemroot%\inf\mshdc.inf
PCI\VEN_1039&DEV_5513=%systemroot%\inf\mshdc.inf
PCI\VEN_10AD&DEV_0001=%systemroot%\inf\mshdc.inf
PCI\VEN_10AD&DEV_0150=%systemroot%\inf\mshdc.inf
PCI\VEN_105A&DEV_4D33=%systemroot%\inf\mshdc.inf
PCI\VEN_1106&DEV_0571=%systemroot%\inf\mshdc.inf

I had tested that the base image works by completing a
boot up and logging in as a local admin. Then re-ran
SysPrep.

I then created a Ghost image using -z9 to create the
smallest file possible. When I transfered this image onto
an identical workstation the following error occurs on
booting. This error appears after the initial Bios setup.

STOP: 0x0000007B (0x818177F0, 0xC0000102, 0x00000000,
0x00000000) Inaccessible_boot_device.
.
Click to expand...
 
Back
Top