Inaccessible boot device

  • Thread starter Thread starter Wayne
  • Start date Start date
W

Wayne

Yesterday, when I started up my standalone computer,
which does not connect to Internet, it has prompted the
blue screen with a error message: 0x000007b( 0x81893BD0,
0x000009C,0x00000000,0x00000000,0x00000000)
inaccessible_boot_device.

I have checked the cable connections, all of them are
correct. I have tried to run in safe mode, it is also
failed and get the same error message. I have tried to
plug the harddisk, which is FAT32, to other PC,
motherboard can recognize the harddisk but Windows
Explorer cannot recognize it. I have tried to use a
Windows98 bootup disk, I found that the file is still
existing.

How can I reboot the computer successfully and get back
all the data?
Thank you very much!
 
What was the last thing done to the machine? Any updates to the drivers or
firmware applied? You might be able to swap the system hive out and boot
the machine that way but you would need a backup of the old system hive to
make the machine bootable.
 
I did not do anything to the machine and no any updates
to the drivers or firmware before. In fact, I have tried
to use Recovery Disk but it does not work! I have also
tried to check disk and it shows that the file structure
is corrupted. Unfortunately, I did not backup the data
and I want to get back the data. What should I do to
recover the data? I have also tried to plug the harddisk
as slave to other computer. It also does not work. Any
suggestions? Thank you very much.




-----Original Message-----
What was the last thing done to the machine? Any updates to the drivers or
firmware applied? You might be able to swap the system hive out and boot
the machine that way but you would need a backup of the old system hive to
make the machine bootable.

--
Joseph Conway [MSFT]
Windows 2000/2003 Server group

This posting is provided "AS IS" with no warranties, and confers no rights
Wayne said:
Yesterday, when I started up my standalone computer,
which does not connect to Internet, it has prompted the
blue screen with a error message: 0x000007b( 0x81893BD0,
0x000009C,0x00000000,0x00000000,0x00000000)
inaccessible_boot_device.

I have checked the cable connections, all of them are
correct. I have tried to run in safe mode, it is also
failed and get the same error message. I have tried to
plug the harddisk, which is FAT32, to other PC,
motherboard can recognize the harddisk but Windows
Explorer cannot recognize it. I have tried to use a
Windows98 bootup disk, I found that the file is still
existing.

How can I reboot the computer successfully and get back
all the data?
Thank you very much!
Click to expand...


.
Click to expand...
 
i had had that problem but recovered the data by using a utility stellar
phoenix.

Wayne said:
I did not do anything to the machine and no any updates
to the drivers or firmware before. In fact, I have tried
to use Recovery Disk but it does not work! I have also
tried to check disk and it shows that the file structure
is corrupted. Unfortunately, I did not backup the data
and I want to get back the data. What should I do to
recover the data? I have also tried to plug the harddisk
as slave to other computer. It also does not work. Any
suggestions? Thank you very much.




-----Original Message-----
What was the last thing done to the machine? Any updates to the drivers or
firmware applied? You might be able to swap the system hive out and boot
the machine that way but you would need a backup of the old system hive to
make the machine bootable.

--
Joseph Conway [MSFT]
Windows 2000/2003 Server group

This posting is provided "AS IS" with no warranties, and confers no rights
Wayne said:
Yesterday, when I started up my standalone computer,
which does not connect to Internet, it has prompted the
blue screen with a error message:
Click to expand...
Click to expand...
00007b(
0x81893BD0,


.
Click to expand...
Click to expand...
 
Back
Top