Image crashes after 10 to 15 mins in CF

  • Thread starter Thread starter G.R
  • Start date Start date
G

G.R

All,

I have built an Image with the Explorer shell and also a custom shell.
FBA runs successfully and the OS boots. But the problem is after 10 to
15 mins it throws up the blue screen with 0x000000F4 error. And in the
subsequent restart the bios is not able to recognise the CF. Has anyone
faced this problem? or kindly give me pointers in solving the same.

Regards,
AGR
 
AGR,

There should be more info on that BSOD. E.g., parameters of the F4 exception.
The issue is likely due to some 3rd party driver or etc. that you might have added to your image. it is unlikely though because you
added Explorer shell. Not knowing details about your image and the target hardware it is going to be hard to help.

See if this could your problem: http://support.microsoft.com/default.aspx?scid=kb;en-us;330100

Btw, I wonder how come your image can have two shells - Explorer and a custom one?
 
KM,

I basically tried with two types of shells and both were causing
problems. But if it is because of 3rd party drivers, why does it run
for 10 to 15 mins and then crashes. Anyways I will post the whole
error.

Regards,
AGR
 
Back
Top