G
Guest
How to get my browser window to open at "maximum" size automatically?
Currently I have to maximize it each time. Thanks for your help.
Currently I have to maximize it each time. Thanks for your help.
F
Frank Saunders, MS-MVP IE/OE
Kelly said:
Windows remembers the size of the last Normal IE window closed.
Open such a link.
Don't use the maximize button.
Stretch the edges/corners so that the window fills the screen.
Close all other IE windows.
Close the stretched window.
--
Frank Saunders, MS-MVP, IE/OE
Please respond in Newsgroup only. Do not send email
http://www.fjsmjs.com
Protect your PC
http://www.microsoft.com/security/protect/
J
Jan Il
Hi Kelly 
Try the following and see if it helps:
In the last window to be closed only, pass the cursor over the right side of
the screen until you get a two ended arrow <---> (Do not use Maximize), then
hold the left mouse button down and drag the edge of the screen to the right
as far as you want it. Then do the same on all the other sides until it
fills the screen.
Use the "launch IE Browser" shortcut, you can R-click>properties>run
Maximized>apply>OK out. That works as well.
or....
Courtesy of Jim Byrd:
"Close all windows EXCEPT the one that opens "minimized"; right click on
your Task Bar, either on the open space on the right or left end (your
choice); select "Tile Windows Horizontally" and IE will maximize; close IE.
Re-open IE and it will be maximized. Just showed a buddy this trick
yesterday and works like a charm. Enjoy."
It does work like a charm, but it isn't quite a normal "maximize" just a
full screen with a border. However, it does subsequently hold that.
There's also AutoSizer, free, here:
http://www.southbaypc.com/ (what I
use, BTW)
or........
Courtesy of Robert Aldwinckle:
Do *not* maximize the window when you want to preserve a window's normal
properties. From your description it sounds as if you may be getting
temporary persistence of a window's maximized properties. In that case a
window's normal properties would be unchanged. In order to save a window's
normal properties you have to close the window in normal mode; further, if
there are any other windows open in normal mode still open their properties
will be preserved when they close. So if you aren't making sure that
iexplore.exe is no longer an active process (e.g. using Task Manager) after
you close your modified window that could also explain your symptom even if
you are making your modifications on a normal mode window.
Another possibility is that your user profile is not yours to change or
something equivalent is inhibiting updates. In that case check with your
Administrator (e.g. ask if a "mandatory profile" is in effect) or see if a
replacement user profile can be created.
See item 4, Testing User Profiles, in the following article for related
information.
KB281770 - How to Perform Clean-Boot Troubleshooting for Windows
2000
If these steps do not resolve your problem, or you need help with the above,
please post back to this thread with the details and any error messages.
Hope this helps
Jan
Smiles are meant to be shared,
that's why they're so contagious.
Replies are posted only to the newsgroup for the benefit or other readers.
How to make a good newsgroup post:
http://www.dts-l.org/goodpost.htm
in message news:[email protected]...
Try the following and see if it helps:
In the last window to be closed only, pass the cursor over the right side of
the screen until you get a two ended arrow <---> (Do not use Maximize), then
hold the left mouse button down and drag the edge of the screen to the right
as far as you want it. Then do the same on all the other sides until it
fills the screen.
Use the "launch IE Browser" shortcut, you can R-click>properties>run
Maximized>apply>OK out. That works as well.
or....
Courtesy of Jim Byrd:
"Close all windows EXCEPT the one that opens "minimized"; right click on
your Task Bar, either on the open space on the right or left end (your
choice); select "Tile Windows Horizontally" and IE will maximize; close IE.
Re-open IE and it will be maximized. Just showed a buddy this trick
yesterday and works like a charm. Enjoy."
It does work like a charm, but it isn't quite a normal "maximize" just a
full screen with a border. However, it does subsequently hold that.
There's also AutoSizer, free, here:
http://www.southbaypc.com/ (what I
use, BTW)
or........
Courtesy of Robert Aldwinckle:
Do *not* maximize the window when you want to preserve a window's normal
properties. From your description it sounds as if you may be getting
temporary persistence of a window's maximized properties. In that case a
window's normal properties would be unchanged. In order to save a window's
normal properties you have to close the window in normal mode; further, if
there are any other windows open in normal mode still open their properties
will be preserved when they close. So if you aren't making sure that
iexplore.exe is no longer an active process (e.g. using Task Manager) after
you close your modified window that could also explain your symptom even if
you are making your modifications on a normal mode window.
Another possibility is that your user profile is not yours to change or
something equivalent is inhibiting updates. In that case check with your
Administrator (e.g. ask if a "mandatory profile" is in effect) or see if a
replacement user profile can be created.
See item 4, Testing User Profiles, in the following article for related
information.
KB281770 - How to Perform Clean-Boot Troubleshooting for Windows
2000
If these steps do not resolve your problem, or you need help with the above,
please post back to this thread with the details and any error messages.
Hope this helps
Jan
Smiles are meant to be shared,
that's why they're so contagious.
Replies are posted only to the newsgroup for the benefit or other readers.
How to make a good newsgroup post:
http://www.dts-l.org/goodpost.htm
in message news:[email protected]...