ID 2011

  • Thread starter Thread starter deejaydee
  • Start date Start date
D

deejaydee

Hi Guys &Dolls,
I have this problem , I'm using 2 desktops + 1
laptop, i see the network computers ok

The desktop in question is a Dell Dimension 4600i, running XP3 Pro, Clean
install

I had a problem with graphics card FX 5200 which as now been replaced with
new card Geforce 6200 256MB.

This IRP stack size I increased the size from 12 to 50 this did'nt solve
anythng, I then disabled the graphics card

and rebooted ,and checked for IRP stack size this had disappeared
alltogether.

I'm stumped
deejaydee
 
Hi Guys &Dolls,
I have this problem , I'm using 2 desktops + 1
laptop, i see the network computers ok

The desktop in question is a Dell Dimension 4600i, running XP3 Pro, Clean
install

I had a problem with graphics card FX 5200 which as now been replaced with
new card Geforce 6200 256MB.

This IRP stack size I increased the size from 12 to 50 this did'nt solve
anythng, I then disabled the graphics card

and rebooted ,and checked for IRP stack size this had disappeared
alltogether.

I'm stumped
deejaydee
Click to expand...

The usual reason for changing IRPStackSize is that you get an error
message when accessing a computer's shared folders over a LAN:

Not enough server storage is available to process this command.

Not enough memory to complete transaction. Close some applications
and retry.

Is that what's happening? If so, the solution is to change
IRPStackSize on the computer that can't be accessed, as shown here:

Antivirus Software May Cause Event ID 2011
http://support.microsoft.com/?scid=kb;en-us;177078

Be sure to specify the name of the registry value as "IRPStackSize".
It's case-sensitive, so calling it "IRPstacksize" won't work.
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Desktop Experience)

Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.

Microsoft Most Valuable Professional Program
http://mvp.support.microsoft.com
 
Thanks for your quick reply. this morning I further investigated my network,
I noticed a printer problem, usb2.0 printer , printing out a usb1.0 test
print on this Dell computer
on the other desktop which is shared with the printer, it printed correctly
usb2.0.
I'm thinking about the new installation that I did, My own Dell xp pro
slipstreamed with SP3
everything went without any hiccups ,after that I used AutoPatcher for the
updates , there is'nt much else
onboard at the moment. If I don;t resolve this problem , I may start over
anew after the Xmas.

Merry Xmas to all readers
 
Back
Top