ICS on XP through hub

  • Thread starter Thread starter Jim
  • Start date Start date
J

Jim

I have 2 comps connected to eachother through a hub and
connected to the internet using a DUN. I have a third
comp that will (hopefully) soon be hooked to the
network. Anyway, my main problem is that everytime my
host computer disconnects from the internet, my client
computer stops recognizing that the DUN even exists. So,
when I go to connect the client to the internet after
connecting the host, there is no connection there. To
get it back, I have to run the networking wizard on both
machines. Before I installed the hub, there was no
problem. I am wondering if there's a setting I need to
change or if there is something else I need to be looking
at... I would hate to have to do this everytime I want to
connect to the internet. Thank you.
 
posting the results of ipconfig /all before and after DUN may help.

--
For more and other information, go to http://www.ChicagoTech.net

Don't send e-mail or reply to me except you need consulting services.
Posting on MS newsgroup will benefit all readers and you may get more help.

Robert Lin, MS-MVP, MCSE & CNE
Windows & Network Support, Tips and FAQs on http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.
 
Back
Top