I E 6 will not load pages.

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Hello/

My I E 6 (on windows xp home) will not load pages - and they are left blank.
Sometimes I am able to get initial (index) pages (very slowly) but when I
click on links I get the blank pages. I E 6 and Outlook Express are not on
my Add/Remove list and I am wondering if they are installed propperly.

I think I really need to re-install windows xp but unfortunately the OS disk
did not come with the computer! (bought at "PC World" Southampton UK)

IE6 on "windows Me" (my second computer) works fine and has enabled me to
place this message! Any advice would be gratefully recieved.

All the best/

Russell (www.russellaustin.net)
 
Hi Russell :-)
Hello/

My I E 6 (on windows xp home) will not load pages - and they are left
blank. Sometimes I am able to get initial (index) pages (very
slowly) but when I click on links I get the blank pages. I E 6 and
Outlook Express are not on my Add/Remove list and I am wondering if
they are installed propperly.

I think I really need to re-install windows xp but unfortunately the
OS disk did not come with the computer! (bought at "PC World"
Southampton UK)

IE6 on "windows Me" (my second computer) works fine and has enabled
me to place this message! Any advice would be gratefully recieved.
Click to expand...
Try the following and see if it helps:

Blank Pages:

Go to Start|Run and enter "regsvr32 /i urlmon.dll" (without the
quotes). After you get a Success message, re-boot. If that doesn't work,
then check out the following article and do the additional steps outlined
there:

You Cannot Open New Internet Explorer Window or Nothing Happens After You
Click a Link
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q281679

or................

Blank Pages - Windows
http://inetexplorer.mvps.org/answers2.htm#blank_windows

or.....................

You get a blank page:

1. Click Start, and then click Run.

2. In the Open box, type:

regsvr32 urlmon.dll

3. Click OK, and then click OK again when you receive the following message:

DllRegisterServer in urlmon.dll succeeded.

4. If that doesn't fix it, see this article:
http://www.mvps.org/inetexplorer/answers.htm#new_window

5. If you are using WinXP try this:
http://www.mvps.org/sramesh2k/reg/IE_Default_Browser.reg

You can also try this:

Go to Start/run, and type SFC (msconfig for WinXP).
Choose 'Extract One File From Installation Disk' ("Expand File" for WinXP).
Type oleaut32.dll, not worrying about its location. Then, click Start.

Next to 'Restore From', type in or browse for the file's location, which is
probably in the Win98 (i386 for WinXP) folder of your installation CD-ROM
(typically D:\Win98), or in your Windows\Options\Cabs (Windows\i386 for
WinXP) folder, as the case may be.

Then, next to 'Save File In', enter C:\Windows\System (C:\Windows\System32
for WinXP), and click OK. System File Checker (or msconfig) looks for the
file, saves it as you requested, and then tells you that 'the file has been
successfully extracted'.

You may need to reboot.

or............................

Resetting security level to default "medium" resolved issue

Go to Start|Run and enter "regsvr32 /i urlmon.dll" (without the
quotes). After you get a Success message, re-boot. If that doesn't work,
then check out the following article and do the additional steps outlined
there:

You Cannot Open New Internet Explorer Window or Nothing Happens After You
Click a Link
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q281679


If these steps do not resolve your problem, please post back to this thread
with the details and any error messages.

Hope this helps

Jan :)
Smiles are meant to be shared,
that's why they're so contagious.

Please reply to the newsgroup so others may benefit.
Replies are posted only to the newsgroup for the benefit or other readers.

How to make a good newsgroup post:
http://www.dts-l.org/goodpost.htm
 
Back
Top