I don't get "Vista"

  • Thread starter Thread starter ng_reader
  • Start date Start date
N

ng_reader

Alright, that's a little vague.

Two shared printers off 2 computers running XP. One notebook running Vista
that can print fine to one shared printer but not the other. The one it
*can* print to is hardwired to the network, the one in *cannot* isn't. But,
that's not the problem.

The notebook "sees" the printer share just fine. Just trying to connect or
run the setup wizard ultimately leads to an "access denied" error.

1) I tried googling the answer and it wasn't "add a local printer" (even
though it's not)
2) I tried installing the printer driver both before and after adding the
printer (didn't work)

I mean it's *right* there, the machine sees it. Why can't it connect to it?
Do I need to change something in the machine's permission settings? It's an
effing printer. Who cares if the whole world sees it.

Mr. Curious
 
Hi
Would you please be more specific, are the two printers connected to
computers?
Hardwire to the Network means a Network printer and Not a printer Off a
computer.
make sure that any computer that suppose to be able to use the printer has
the drivers for this printer configured to work over the network.
Jack (MS, MVP-Networking).
 
Jack-MVP said:
Hi
Would you please be more specific, are the two printers connected to
computers?
Hardwire to the Network means a Network printer and Not a printer Off a
computer.
Click to expand...

Errr. Both are connected via USB cable to desktop computer (where the
printer is setup as a share). Once computer uses a wireless card to connect
to the wireless router, the other comes in via switched patch cable to same
piece of hardware; a wireless router.
make sure that any computer that suppose to be able to use the printer has
the drivers for this printer configured to work over the network.
Jack (MS, MVP-Networking).
Click to expand...
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

I was under the assumption, perhaps now incorrectly, that there was no
difference between networked printer drivers and local printer drivers. In
any event, it's a Canon Pixma and I can't reccommend it highly enough for
general printing. The Ink carts (on ebay - work fine) are about a buck a
piece.
 
Hi
The Drivers are the same Drivers (corresponding to the OS). They are
installed in the regular way on the computers that the Printers are
connected to.
However when the Drivers are installed on a computer that the Printer is No
connected to, they have to be installed as a Drivers for Networked computer.
Wire or wireless should Not make any difference.
Make sure that the Software Firewall on each computer allows free local
traffic. If you use 3rd party Firewall On, Vista/XP Native Firewall should
be Off, and the active Firewall has to adjusted to your Network IP numbers
on what is some time called the Trusted Zone (consult your 3rd Party
Firewall instructions.
General example, http://www.ezlan.net/faq#trusted
Vista File and Printer Sharing-
http://technet.microsoft.com/en-us/library/bb727037.aspx
Windows XP File Sharing -
http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
Printer Sharing XP -
http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx
Windows Native Firewall setting for Sharing XP -
http://support.microsoft.com/kb/875357
Windows XP patch for Sharing with Vista (Not need for XP-SP3) -
http://support.microsoft.com/kb/922120
Jack (MVP-Networking).
 
Jack-MVP said:
Hi
The Drivers are the same Drivers (corresponding to the OS). They are
installed in the regular way on the computers that the Printers are
connected to.
However when the Drivers are installed on a computer that the Printer is
No connected to, they have to be installed as a Drivers for Networked
computer.
Wire or wireless should Not make any difference.
Make sure that the Software Firewall on each computer allows free local
traffic. If you use 3rd party Firewall On, Vista/XP Native Firewall should
be Off, and the active Firewall has to adjusted to your Network IP numbers
on what is some time called the Trusted Zone (consult your 3rd Party
Firewall instructions.
General example, http://www.ezlan.net/faq#trusted
Vista File and Printer Sharing-
http://technet.microsoft.com/en-us/library/bb727037.aspx
Windows XP File Sharing -
http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
Printer Sharing XP -
http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx
Windows Native Firewall setting for Sharing XP -
http://support.microsoft.com/kb/875357
Windows XP patch for Sharing with Vista (Not need for XP-SP3) -
http://support.microsoft.com/kb/922120
Jack (MVP-Networking).
Click to expand...

I'll check the firewall settings. The notebook running Vista can print to
the one shared printer (the one that takes the expensive ink) but not the
other. And the other computers can print to any of the printers just fine.
It's just the Vista notebook having a problem with one XP machine. And not
the other.
 
What is the source of the printer driver you are trying to install? Is it an
XP or a Vista driver?

Tom Ferguson
 
Hi Tom,

I tried to match the driver to the OS. So, while it's been a few days, I'm
guessing that since it was a Vista OS, I downloaded the Vista driver.

Tks
 
On the Vista PC go to Control Panel Printers Add printer.

Add a local printer (Yes. I know you want to add a network printer).

Click "Create a new port Local Port Next

In the next box , enter a port name:
\\PCname\Printername

PCname is the network name of the XP PC or Network Share where you have
the printer and Printername is the network name of that printer. Be
careful with this names. Check in your XP PC Control Panel Printers and
faxes your printer right click share share resources name

Choose the manufacturer and printer model of the printer you are adding.

Now the printer will be added and you can print a test page or print
something to test it.

Let us know.

Tom Ferguson
 
Back
Top