I can't change my wall paper

  • Thread starter Thread starter G
  • Start date Start date
G

G

When ever I right click and go to properties and click
desktop the windows close and an error report pops up
taking about "a Run a DLL as an App has encountered a
problem..." and I cant change my wall paper. Can some one
please help me.


Also when I pick settings a window says "The selected
graphics display driver can not be used. It was written
for a previous version of Windows, and is no longer
compatible with this version of windos.

The system had been started using the default VGA. driver
Please contact your hardware manufacturer to get an
upgraded driver, or selcet one of the Microsoft provided
drivers." What do I do
 
-----Original Message-----
When ever I right click and go to properties and click
desktop the windows close and an error report pops up
taking about "a Run a DLL as an App has encountered a
problem..." and I cant change my wall paper. Can some one
please help me.


Also when I pick settings a window says "The selected
graphics display driver can not be used. It was written
for a previous version of Windows, and is no longer
compatible with this version of windos.

The system had been started using the default VGA. driver
Please contact your hardware manufacturer to get an
upgraded driver, or selcet one of the Microsoft provided
drivers." What do I do

.
You need do supply the correct display drivers for your
operating system...If you don't know the type or make VGA
card your using. View your manual or box/package it come
in, should give you an indication of the type and make of
diplay you're using...or Power off have a look at the
chip...may need to remove fan & heatsink the manufacture
name and model should be there...or in command promt
type "Debug" (without "") DC:000xx (xx = 15 20 25 35 45 so
on). Then do a seach on the drivers or go to the
manufactures website and download appropriate drivers.
Once you have found the correct driver it's reccommend
that you first remove the old driver or card and reboot
the system. Plug n Play should run.. then point it do
where you saved your driver(s) too.

As for the .dll error.. take note of exactly which .dll
file it is...go to windows knowledgebase on do a search
there on your error message.

Andre
 
Back
Top