HPpsc 2210 .. Problems !

  • Thread starter Thread starter moonbeam
  • Start date Start date
M

moonbeam

HI..
Printer is almost a month old and sure have had some problems. 1st.
Does anyone's printer make a LOT of noise ? (enough to make one jump
when it starts printing) and it really Shakes so hard I am going to that
I'm going to have to put it on a stand alone table .
and .. I have tried to print a jpg using "BEST" as the printing mode.
ISn't that supposed to be the very best copy ? I tried it 2 times and
the jpg printed in color but you could hardly see it because it
printed a dark gray color over it . I didn't select "Grayscale"..I
select the Color Cartridge and Best as printing mode. This has happened
both times I've selected "Best" ..
thank you much
 
i agree with you, this psc2210 is shaking my table
when it starts & when it prints,
but except for the bug i describe in a msg, hereunder, it produces
good photos
(e-mail address removed)
 
HI..
Printer is almost a month old and sure have had some problems. 1st.
Does anyone's printer make a LOT of noise ? (enough to make one jump
when it starts printing) and it really Shakes so hard I am going to that
I'm going to have to put it on a stand alone table .
and .. I have tried to print a jpg using "BEST" as the printing mode.
ISn't that supposed to be the very best copy ? I tried it 2 times and
the jpg printed in color but you could hardly see it because it
printed a dark gray color over it . I didn't select "Grayscale"..I
select the Color Cartridge and Best as printing mode. This has happened
both times I've selected "Best" ..
thank you much
Click to expand...
I have the HP PSC 750XI and it is quiet and no shaking at all. Maybe
yours is defective and should be exchanged.
 
Printer is almost a month old and sure have had some problems. 1st.
Does anyone's printer make a LOT of noise ? (enough to make one jump
when it starts printing) and it really Shakes so hard I am going to that
I'm going to have to put it on a stand alone table .
Click to expand...

I use a PSC 2210 both at home and at work and do not have any issues with noise
or vibration. You should call HP support tool-free at 1-800-HPINVENT
(474-6836) for warranty service.
and .. I have tried to print a jpg using "BEST" as the printing mode.
ISn't that supposed to be the very best copy ? I tried it 2 times and
the jpg printed in color but you could hardly see it because it
printed a dark gray color over it .
Click to expand...

If you are using the HP Printing and Imaging Editor version software you should
check the following for a workaround:
http://h20015.www2.hp.com/en/document.jhtml?lc=en&docName=c00001927

I believe there is a new driver which also addresses this issue, but it is a
rather large download:
http://h20015.www2.hp.com/en/softwa...tware&prodId=hppsc2210a79499&sw_lang=en&cc=us

Regards,
Bob Headrick, not speaking for my employer HP
 
Hi Have a PSC 2210 (the model up) and it doesn't shake or print incorrectly.

Sounds like you have a faulty one there.

Why don't you change it for a 2210 much better at printing and scanning,
plus you have the added fax option.


Pete
 
opps how stupid am I lol
Thought you had a 2110 ,thats the model bellow the 2210

I would still take it back for a exchange.


Pete
 
Back
Top