HP Netraid 1si

  • Thread starter Thread starter Ronny Mandal
  • Start date Start date
R

Ronny Mandal

Hi!

I have an issue with this card. Two discs are connected, i.e. one IBM
UltraStar 18,2GB SCSI LVD/SE and one Quantum Atlas V 10KII 18,4gb SCSI
LVD160. Netraid is configured to RAID 0. The cable connecting them are
from 1999, I do not know what type it is (68 pin).

The Atlas-disk will not register unless I configure it to run in
SE-mode, even if IBM is removed. The IBM will register anyway. May it be
a termination issue? The Ibm is terminated (so is the cable), the
Atlas is not.


Regards,

Ronny Mandal
 
Ronny said:
Hi!

I have an issue with this card. Two discs are connected, i.e. one IBM
UltraStar 18,2GB SCSI LVD/SE and one Quantum Atlas V 10KII 18,4gb SCSI
LVD160. Netraid is configured to RAID 0. The cable connecting them are
from 1999, I do not know what type it is (68 pin).
Click to expand...
It was the cable that did not support LVD. Changing the cable did
wonderful things


Regards,

Ronny Mandal
 
Back
Top