HP Laserjet 1012 and WP5

  • Thread starter Thread starter Dave
  • Start date Start date
D

Dave

I'm about to purchase the LaserJet 1012 for a technophobic friend who
is still using WordPerfect 5 on Windows 98. Will this printer work
for software this old?

Thank you
 
Dave said:
I'm about to purchase the LaserJet 1012 for a technophobic friend who
is still using WordPerfect 5 on Windows 98. Will this printer work
for software this old?
Click to expand...

If they are really running the Win 98 version of Word Perfect it should be OK.
HP has Win 98 drivers for the LaserJet 1012 available at
http://h20000.www2.hp.com/bizsuppor...mit.y=11&submit.x=5&lang=en&cc=us&swEnvOID=20

If they are running the DOS version of WP from within Windows things may be a
bit tougher and a different LaserJet or DeskJet model may be a better choice.
See the WordPerfect driver page at: http://www.wpdos.org for a bunch of useful
information on WP both in DOS and Windows.

Regards,
Bob Headrick, not speaking for my employer HP
MS MVP Printing/Imaging
 
Bob Headrick said:
If they are running the DOS version of WP from within Windows things may be a
bit tougher and a different LaserJet or DeskJet model may be a better choice.
See the WordPerfect driver page at: http://www.wpdos.org for a bunch of useful
information on WP both in DOS and Windows.
Click to expand...

Specifically, the 1012 only has a USB port, and does not run PCL. WP5
DOS will not be able to use it at all with a normal set up. However,
the hacks described on the site mentioned (specifically
<http://www.wpdos.org/anyprinter.html>) will allow it to work (by
rerouting the print stream to a translator and then to the USB port)
-- be sure you can set this up before buying the 1012. Otherwise, go
up a model to the 1150 which has PCL and a parallel port, for about
$100 more. Generally the absolute cheapest model has had a lot of
corners cut anyway.
 
Back
Top