hp designjet 600 (c2848a)

  • Thread starter Thread starter Pazi
  • Start date Start date
P

Pazi

Sorry for my bad english..
Printing is fine, no problems at all with lines and text.. But rasters does
not print out at all..
If there is printed a house, and eaves, and made a little shade under eaves
(just like sun was shining and made a little shadows) it will not print it
at all..
Memory in printer is fine, computer is old 333 mhz, but works with Win98se
and has 64 mb of memory.
Ecp parallel port is used and driver is v4.65 (1995 ?)
Any help ?
 
Pazi said:
Sorry for my bad english..
Printing is fine, no problems at all with lines and text.. But rasters does
not print out at all..
If there is printed a house, and eaves, and made a little shade under eaves
(just like sun was shining and made a little shadows) it will not print it
at all..
Click to expand...

Sorry I do not have an answer, but you might try asking the question in HP's
Designjet support forum at:
http://forums1.itrc.hp.com/service/forums/categoryhome.do?categoryId=414

Regards,
Bob Headrick, not speaking for my employer HP
 
Designjet 600 is really a plotter, designed for CAD work. Lines and Text,
it does this best. It will do raster images, but not as well as photo
printers.
 
Designjet 600 is really a plotter, designed for CAD work. Lines and Text,
it does this best. It will do raster images, but not as well as photo
printers.
Click to expand...

500 and 800 models have same problem, i have heard..
Some models does those raster images..
Strange
 
500 and 800 models have same problem, i have heard..
Some models does those raster images..
Strange
Click to expand...

DesignJet's typically don't use PCL. They use HPGL, RTL or PostScript.
If you are not using the Windows driver, you need to learn a new
language. HPGL is mainly designed for line drawings. RTL is Raster
Transfer Language. And PostScript is PostScript.
 
Back
Top