HP BUSINESS INKJET 2800

  • Thread starter Thread starter Marty
  • Start date Start date
M

Marty

Hi,m

I have an error on an HP business inkjet 2800 "PUMP STALL"

Can anyone help me by telling me which part i have to replace to solve
this error.

Kind Regards

Martin
 
Well, Dave,

Would you have a part number for this part which by the way is not is
the service manual, i take it that the ink supply station would be more
another term for a PUMP.

Martin
 
Marty said:
Well, Dave,

Would you have a part number for this part which by the way is not is
the service manual, i take it that the ink supply station would be more
another term for a PUMP.

Martin
Click to expand...

Marty
The usual failed part is the Ink Supply Station.
Easy to check if this is the case.
Open the ink Supply station and remove all of the ink cartridges.
You will see a small (usually white) plastic knob underneath each of the
cartridges, they should be spring loaded, one or more of them may be stuck
down. If so you can fix the problem yourself but it is not very easy. It
involves removing the station and replacing a broken piece of plastic with a
steel stud or similar and hooking the spring back on. Also reinforcing the
other plastic studs that have not yet broken.
It is easier to replace the supply station and this is probably still
available. I believe HP may have reinforced these parts at some time as this
used to be a common failure.
The part number is I believe C8174-67038, go to www.partsurfer.hp.com select
business inkjet 2800 for the model and go from there.
Tony
 
Back
Top