hp 960cse gets stuck on end of printing avery biz cards

  • Thread starter Thread starter John H.
  • Start date Start date
J

John H.

help? the last row prints over the row above:(
avery said this, any ideas?...


Thank you for contacting Avery Technical Support.

We received your request for support. I understand the paper is getting
stuck in your printer. This would indicate a feed issue.

I would recommend changing the setting for paper stock thickness for the
printer. If you have already done this, I suggest contacting the
printer manufacturer for further advice.
 
John H. said:
any ideas?

Are you trying to print to the bottom of the page? The DeskJet 960 has a
physical limit of 0.46" for the bottom margin as it needs some margin to
handle the paper.

Regards,
Bob Headrick, not speaking for my employer HP
 
My HP960 and HP1220cse printers both have difficulty with thicker stock.
Their turn radius is too sharp (i.e. front-to-front feed verses
rear-to-front on my Canon i960). I had some sample paper packs and both the
HP's had difficulty feeding about half the demo papers. Sometimes it was
the slickness of the paper. Often they would hang on feeding; sometimes
while in the printer and other times while first feeding it into the printer
(which can make an inky mess on the rollers).

When I buy paper for the HP, I need to find the thinnest stock else it they
will jam or not feed.

Another reason why I like the Canon i960 -- besides ink cost being far less
than HP's price.

BP~
 
Back
Top