How to upgrade motherboard in Windows XP?

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I upgrade my motherboard once a year on average, I just wish there was a way
to cancel the license and re-register it again. I have looked to see if this
is possible but seem doubtful. Have worked on PCs before and am worried when
I upgrade main components will need to format/run setup. Has anyone done this
and can reassure me that I wont need to re-register it?
 
After a motherboard upgrade, a Repair Installation is normally required to
properly detect the new hardware:
http://www3.telus.net/dandemar/repaxp.htm

Activation will not be a problem.
Attempt internet activation.
If that fails choose the option to activate by phone.
Call Microsoft at the displayed number, done in about 5 minutes.

This may not be possible if Windows XP is OEM.
 
Upgradeing components usually never will require a re-register,a new board
almost always will,use the phone-in service.Also,youre wasting youre time
 
Baz said:
I upgrade my motherboard once a year on average, I just wish there was a way
to cancel the license and re-register it again. I have looked to see if this
is possible but seem doubtful. Have worked on PCs before and am worried when
I upgrade main components will need to format/run setup.


Normally, and assuming a retail license (many OEM installations
and licenses are not transferable to a new motherboard - check yours
before starting), unless the new motherboard is virtually identical
(same chipset, same IDE controllers, same BIOS version, etc.) to the
one on which the WinXP installation was originally performed, you'll
need to perform a repair (a.k.a. in-place upgrade) installation, at
the very least:

How to Perform an In-Place Upgrade of Windows XP
http://support.microsoft.com/directory/article.asp?ID=KB;EN-US;Q315341

The "why" is quite simple, really, and has nothing to do with
licensing issues, per se; it's a purely technical matter, at this
point. You've pulled the proverbial hardware rug out from under the
OS. (If you don't like -- or get -- the rug analogy, think of it as
picking up a Cape Cod style home and then setting it down onto a Ranch
style foundation. It just isn't going to fit.) WinXP, like Win2K
before it, is not nearly as "promiscuous" as Win9x when it comes to
accepting any old hardware configuration you throw at it. On
installation it "tailors" itself to the specific hardware found. This
is one of the reasons that the entire WinNT/2K/XP OS family is so much
more stable than the Win9x group.

As always when undertaking such a significant change, back up any
important data before starting.

This will also probably require re-activation, unless you have a
Volume Licensed version of WinXP Pro installed. If it's been more
than 120 days since you last activated that specific Product Key,
you'll most likely be able to activate via the Internet without
problem. If it's been less, you might have to make a 5 minute phone
call.



Has anyone done this
and can reassure me that I wont need to re-register it?


Registration always has been, and always will be, entirely voluntary.



--

Bruce Chambers

Help us help you:



You can have peace. Or you can have freedom. Don't ever count on having
both at once. - RAH
 
Andrew said:
Upgradeing components usually never will require a re-register,a new board
almost always will,use the phone-in service.


That's completely wrong. Registration is entirely voluntary and has
absolutely *nothing* to do with any hardware changes.


Also,youre wasting youre time
on a repair of xp with a new board,a new install is 99% required.

That's also completely wrong. Why do you even bother answering, when
you've obviously no knowledge of the OS?


--

Bruce Chambers

Help us help you:



You can have peace. Or you can have freedom. Don't ever count on having
both at once. - RAH
 
Andrew:
Your information is a little off.
Registration is NEVER required, although Activation is required:
http://aumha.org/win5/a/wpa.htm
A Repair Installation is usually all that is necessary, a Clean Installation
when not necessary can be a waste of time.

--
Jupiter Jones [MVP]
http://www3.telus.net/dandemar/


Andrew E. said:
Upgradeing components usually never will require a re-register,a new board
almost always will,use the phone-in service.Also,youre wasting youre time
on a repair of xp with a new board,a new install is 99% required.
it?
 
Back
Top