How to tell if HP cartridges are low on ink?

  • Thread starter Thread starter brebers
  • Start date Start date
B

brebers

I have an HP 5740 that I've been using since September. I print quite a
lot of pages, since much of my school work is online and I have to
print readings. I print all readings in just black ink, and I've gone
through one 94 and one 96 in the last few months.

Just this past week I had my old 94 refilled in the interest of saving
money and I put in into the printer yesterday. Since then, I've printed
one page of printer alignment and 12 pages front and back of readings.
Just now I got a message telling me that my black cartridge is low on
ink. Imagine my surprise.

So, is this for real? Did I get jipped at the refill store? Is there
some way I can tell by looking at it? I don't have easy access to the
store, so I don't want to go back just to find out that my computer is
incorrectly registering the ink levels. Thanks!
 
brebers said:
I have an HP 5740 that I've been using since September. I print quite a
lot of pages, since much of my school work is online and I have to
print readings. I print all readings in just black ink, and I've gone
through one 94 and one 96 in the last few months.

Just this past week I had my old 94 refilled in the interest of saving
money and I put in into the printer yesterday. Since then, I've printed
one page of printer alignment and 12 pages front and back of readings.
Just now I got a message telling me that my black cartridge is low on
ink. Imagine my surprise.

So, is this for real? Did I get jipped at the refill store? Is there
some way I can tell by looking at it? I don't have easy access to the
store, so I don't want to go back just to find out that my computer is
incorrectly registering the ink levels. Thanks!
Click to expand...

I don't know that particular HP, but if it is like
older HP's then the problem is retention of ink
usage data. You probably took the old 94 out when
it said it was low or just before it said it was
low, then you put the 96, then you put the
refilled 94 in the printer. The problem is that
the printer still recognizes the 94 from the first
time it was in and just keeps calculating ink
usage which is now low even tho the cartridge was
refilled.

The cartridge is probably ok and you probably
didn't get gypped. You need a third cartridge in
succession to get rid of the data on the 94. That
means you need to buy or borrow another black
cartridge and install them in the following
sequence (1) 94 (already installed), (2) 96, (3)
new cartridge, (4) 94. Or, you can try the
following, which may or may not work: with the 94
installed (which it is now) turn on the printer,
open the printer so that the cartridges are ready
to be taken out, pull the plug from the wall
socket and let the printer rest for 5 minutes or
so, and plug the printer back in and close up the
printer. If this works in your printer, the
printer will now think that the cartridges are
new. Caution, the data on the color cartridge
will also be lost so the ink count will be off.
 
brebers said:
I have an HP 5740 that I've been using since September. I print quite a
lot of pages, since much of my school work is online and I have to
print readings. I print all readings in just black ink, and I've gone
through one 94 and one 96 in the last few months.

Just this past week I had my old 94 refilled in the interest of saving
money and I put in into the printer yesterday. Since then, I've printed
one page of printer alignment and 12 pages front and back of readings.
Just now I got a message telling me that my black cartridge is low on
ink. Imagine my surprise.

So, is this for real? Did I get jipped at the refill store? Is there
some way I can tell by looking at it? I don't have easy access to the
store, so I don't want to go back just to find out that my computer is
incorrectly registering the ink levels. Thanks!
Click to expand...
Like George says, you didn't get jipped but you need to reset the
counter. The guy who refilled it should have told you. You really don't
need to do anything and it will still function. If you want to reset it
to avoid the nags then try the tape method.
http://www.inksunlimited.com/hp6657A.html
 
[This followup was posted to comp.periphs.printers and a copy was sent
to the cited author.]

I have an HP 5740 that I've been using since September. I print quite a
lot of pages, since much of my school work is online and I have to
print readings. I print all readings in just black ink, and I've gone
through one 94 and one 96 in the last few months.

Just this past week I had my old 94 refilled in the interest of saving
money and I put in into the printer yesterday. Since then, I've printed
one page of printer alignment and 12 pages front and back of readings.
Just now I got a message telling me that my black cartridge is low on
ink. Imagine my surprise.

So, is this for real? Did I get jipped at the refill store? Is there
some way I can tell by looking at it? I don't have easy access to the
store, so I don't want to go back just to find out that my computer is
incorrectly registering the ink levels. Thanks!
Click to expand...

The printer doesn't actually measure the ink level. Each cartridge has
a unique ID. The printer remembers the type of cartridge, and usually
the current and previously used ID's. It estimates ink usage and
subtracts that from how much the cartridge is supposed to hold.

If you simply refill a cartridge and reuse it, the printer doesn't
know it's been refilled, so it's still calculating based on what it
knows about that cartridge ID.
 
Andrew said:
[This followup was posted to comp.periphs.printers and a copy was sent
to the cited author.]

I have an HP 5740 that I've been using since September. I print quite a
lot of pages, since much of my school work is online and I have to
print readings. I print all readings in just black ink, and I've gone
through one 94 and one 96 in the last few months.
Click to expand...
Click to expand...
THE PRINTER IS GIVING YOU WHAT YOU DESERVE. GO BUY A GENUINE HP CART
AND BE DONE WITH IT.
ABSOLUTELY
Click to expand...
ANOTHER AFTERMARKET INK SCAM BYTES THE DUST
 
tomcas said:
Like George says, you didn't
Click to expand...

YOU ABSOLUTELY GOT SCREWED. YOU DO NOT EVEN KNOW WHAT BRAND OF INK IS
IN THE CART.
get jipped but you need to reset the counter. The guy who refilled it
should have told you. You really don't need to do anything and it will
still function. If you want to reset it to avoid the nags then try the
tape method.
Click to expand...

IF YOU WANT EVERYTHING TO WORK RIGHT GET A GENUINE HP CART. I KNOW THEY
ARE OVERPRICED.
 
Well thanks a lot to those of you who explained the situation. I called
the company and they said next time they will just trade it out with
someone else's to avoid the whole situation so I'm not worried.

To those of you who were completely and totally unhelpful, that was
uncalled for. FYI, I'm a college student and therefore don't have a lot
of money. It doesn't matter what kind of ink is in my printer, all I
print is articles and paper for school! Next time, don't reply.
 
measekite wrote:
YOU DO NOT EVEN KNOW WHAT BRAND OF INK IS
IN THE CART.
Click to expand...
Who cares, at least he knows where the cap lock key is.
IF YOU WANT EVERYTHING TO WORK RIGHT GET A GENUINE HP CART. I KNOW THEY
ARE OVERPRICED.
Click to expand...

Wrong, oh so wrong. I, like thousands of others, refill my HPs with MIS
inks, and get several refills for each cartridge, never with a problem.
 
measekite said:
THE PRINTER IS GIVING YOU WHAT YOU DESERVE.
Click to expand...

If you got what you deserve for ranting in this newsgroup you would be
walking around with a printer cable dragging behind you.
 
tomcas said:
If you got what you deserve for ranting in this newsgroup you would be
walking around with a printer cable dragging behind you.
Click to expand...

hehehehehehe...GOOD ONE!!!
The length of said cable not showing (the interesting part!) would only
be equal to the length of the part showing subtracted from the hole (pun
intended!) length of the cable.
IOW's, that ****wit moron idiot could only feed paper thru his lying
mouth to be printed!
You just gotta love it!
Thanks.
Frank
 
tomcas said:
measekite wrote:
YOU DO NOT EVEN KNOW WHAT BRAND OF INK IS


Who cares, at least he knows where the cap lock key is.



Wrong, oh so wrong. I, like thousands of others, refill my HPs with
MIS inks, and get several refills for each cartridge, never with a
problem.
Click to expand...

WHAT A MESS. YOU DO NOT KNOW WHAT INK YOU ARE USING. YOU ONLY KNOW THE
NAME OF THE RELABELER.
 
brebers said:
Well thanks a lot to those of you who explained the situation. I called
the company and they said next time they will just trade it out with
someone else's to avoid the whole situation so I'm not worried.

To those of you who were completely and totally unhelpful, that was
uncalled for. FYI, I'm a college student and therefore don't have a lot
of money. It doesn't matter what kind of ink is in my printer
Click to expand...
IT WILL THE NIGHT BEFORE YOUR DEADLINE AND YOUR PRINTER CLOGS.
 
WHAT A MESS. YOU DO NOT KNOW WHAT INK YOU ARE USING. YOU ONLY KNOW THE
NAME OF THE RELABELER.
Click to expand...

With MIS you do. It is established fact whom manufactures the ink they
sell, and refilling is not messy at all.
 
IT WILL THE NIGHT BEFORE YOUR DEADLINE AND YOUR PRINTER CLOGS.
Click to expand...

Which is wh you spend the extra couple dollars purchasing ink from a known
quality ink vendor, of which there are some.
 
Gary said:
@newssvr25.news.prodigy.net:




Which is wh you spend the extra couple dollars purchasing ink from a known
quality ink vendor, of which there are some.
Click to expand...
HEY DUMMY. I TOLD YOU ALREADY THERE IS NOT ANY
 
Gary said:
@newssvr25.news.prodigy.net:




With MIS you do.
Click to expand...
DEAR DUM DUMMER AND VERY STUPID. IT IS A KNOWN FACT THEY WILL NOT TELL
YOU. EVEN FURTIE KNOWS THAT. GO LOOK ON THEIR WEBSITE AND SEE IF THEY
DISCLOSE THAT IN WRITING. NOW CALL THEM UP. THEY WILL NOT TELL YOU
WHAT THEY ARE SELLING. YOU ARE VERY STUPID. YOU MUST BE MATT ZUKOWSKI.
It is established fact whom manufactures the ink they
sell, and refilling is not messy at all.
Click to expand...
SO DUMB UNREAL

HUMPTY DUMPTY SAT ON A WALL
HUMPTY DUMPTY HAD A GREAT FALL
ALL DA KINGS HORSES
????????????????????????
 
measekite wrote:

WHAT A MESS.
Click to expand...

Wrong, no mess.Except for your ramblings in all caps.

YOU DO NOT KNOW WHAT INK YOU ARE USING.
Yes I do, MIS inks.

YOU ONLY KNOW THE
NAME OF THE RELABELER.
Click to expand...

Who cares. After several years of using them I have never had any
problems. How do you respond to that smart guy?
 
tomcas said:
measekite wrote:




Wrong, no mess.Except for your ramblings in all caps.

YOU DO NOT KNOW WHAT INK YOU ARE USING.
Yes I do, MIS inks.
Click to expand...

THAT IS THE NAME OF A RELABELER VENDOR
YOU ONLY KNOW THE



Who cares.
Click to expand...

THAT IS AN ADMISSION
After several years of using them I have never had any problems. How
do you respond to that smart guy?
Click to expand...

LIAR LIAR PANTS ON FIRE
 
YOU ABSOLUTELY GOT SCREWED. YOU DO NOT EVEN KNOW WHAT BRAND OF INK IS
IN THE CART.
Click to expand...

So, HP gives you the formulation to their inks, do they? Come on, answer the
question.
IF YOU WANT EVERYTHING TO WORK RIGHT GET A GENUINE HP CART. I KNOW THEY
ARE OVERPRICED.
Click to expand...

In the fairy-tale La-La land that you obviously live in, this may be true,
but in the real world where the rest of us live, using genuine HP cartridges
guarantees no such thing, except the overpriced thing you mentioned. And
that, by the way, is an excellent first step to your recovery from
delusion -- acknowledging that they are overpriced. Next step is that they
are not the only cartridges that will work correctly. Methinks you'll be on
step one for a bit, but keep trying! And good luck! Maybe try turning off
caps lock as an intermediate step.
 
Back
Top