How to dismantle Epson Stylus Color 600?

  • Thread starter Thread starter Psaiyan
  • Start date Start date
P

Psaiyan

As a final effort at unclogging the print heads on my Espon Stylus
Color 600 (before I throw it in the trash), I am going to attempt to
dismantle the printer and attempt to manually clean them.

I have removed the casing and the cartridges, but I do not wish to go
further without knowing exactly what steps to take in
dismantling/removing the black plastic carriage assembly and accessing
the heads.

Your help would be appreciated. I really need someone to walk me
through it... :)
--
Reverend David "PPV" Hawthorne -
ICQ: 339380091

I rode a tank
Held a general's rank
When the blitzkrieg raged
And the bodies stank...

'\
_\______
/ HENTAI \========@
____|__________\_____
/ ___________________ \
\/ _===============_ \/
"-===============-"
 
As a final effort at unclogging the print heads on my Espon Stylus
Color 600 (before I throw it in the trash), I am going to attempt to
dismantle the printer and attempt to manually clean them.

I have removed the casing and the cartridges, but I do not wish to go
further without knowing exactly what steps to take in
dismantling/removing the black plastic carriage assembly and accessing
the heads.

Your help would be appreciated. I really need someone to walk me
through it... :)
Click to expand...

Not really worth fixing---IMHO.

I had a 600 that refused to die. I printed 1000's of pix with
it---it would occassionally clog and always clear itself. Finally, I
could not get it to work and I gave it to my son. He said it worked
fine.

For general printing, you can get inkjets statring around $50---repair
of the 600 just doesn't seem worth it
**************************
Mark Herring, Pasadena, Calif.
Private e-mail: Just say no to "No".
 
I had a 600 that refused to die. I printed 1000's of pix with
it---it would occassionally clog and always clear itself. Finally, I
could not get it to work and I gave it to my son. He said it worked
fine.

For general printing, you can get inkjets statring around $50---repair
of the 600 just doesn't seem worth it
Click to expand...

It'll be worth it for me if I can get it working for the cost of a
little isopropyl alcohol and save $50 (or even £29.04 British pounds
for that matter)... ;)

Being skint sucks.
--
Reverend David "PPV" Hawthorne -
ICQ: 339380091

I rode a tank
Held a general's rank
When the blitzkrieg raged
And the bodies stank...

'\
_\______
/ HENTAI \========@
____|__________\_____
/ ___________________ \
\/ _===============_ \/
"-===============-"
 
Dear Communist

As a rule placing a plastic film under the print heads, as to not
getting any water etc. in the printer
insert a wet paper towel or whatever under the nozzles, leave it soak, Voila

Hope it helps
 
Psaiyan said:
As a final effort at unclogging the print heads on my Espon Stylus
Color 600 (before I throw it in the trash), I am going to attempt to
dismantle the printer and attempt to manually clean them.

I have removed the casing and the cartridges, but I do not wish to go
further without knowing exactly what steps to take in
dismantling/removing the black plastic carriage assembly and accessing
the heads.

Your help would be appreciated. I really need someone to walk me
through it... :)
--
Reverend David "PPV" Hawthorne -
ICQ: 339380091

I rode a tank
Held a general's rank
When the blitzkrieg raged
And the bodies stank...

'\
_\______
/ HENTAI \========@
____|__________\_____
/ ___________________ \
\/ _===============_ \/
"-===============-"
Click to expand...


Check out:
 
This service manual is available for $ 10.50 payable thru Paypal to
this email address: (e-mail address removed) . After I receive paypal
confirmation, I will send a link to you in email for you to download
the file to your computer. Paypal usually confirms payment within 5
minutes.
You will have your manual(s) within 8 hours, usually within 1 hour.

Regards;

(e-mail address removed)





->->> As a final effort at unclogging the print heads on my Espon Stylus
->> Color 600 (before I throw it in the trash), I am going to attempt
to
->> dismantle the printer and attempt to manually clean them.
->>
->> I have removed the casing and the cartridges, but I do not wish to
go
->> further without knowing exactly what steps to take in
->> dismantling/removing the black plastic carriage assembly and
accessing
->> the heads.
->>
->> Your help would be appreciated. I really need someone to walk me
->> through it... :)
->> --
->> Reverend David "PPV" Hawthorne -
->> ICQ: 339380091
->>
->> I rode a tank
->> Held a general's rank
->> When the blitzkrieg raged
->> And the bodies stank...
->>
->> '\
->> _\______
->> / HENTAI \========@
->> ____|__________\_____
->> / ___________________ \
->> \/ _===============_ \/
->> "-===============-"
->
->
->Check out:
->
->
->---
->Susan
->
 
Back
Top