How to boot by keyboard?

  • Thread starter Thread starter ggroups2
  • Start date Start date
G

ggroups2

I went into the bios and selected the spacebar as the key to boot the
computer but it doesn't work. Is there anything else I need to do? I
have a P4PE.
 
Ok I set the jumper but still no go. Damn does that mean my power
supply cannot supply at least 1A on the +5VSB lead whatever that means?
 
ggroups2 said:
Ok I set the jumper but still no go. Damn does that mean my power
supply cannot supply at least 1A on the +5VSB lead whatever that means?
Click to expand...

Try some other way, I prefer Ctrl + Esc, since a mis-touch on Spacebar only
can restart PC
when not intended. The combo key above is not for accidental touch, except
in very rare case.
 
Well it worked! I booted using the mouse then I changed it to sleep and
disabled mouse and it worked too. However I tried booting using the
sleep key and it didn't work today. This is strange. Also Ithe mouse
is still lit (optical) whent the computer is off even though mouse
booting is disabled.
 
This will only work with me if the box is continually connected to the
mains.
I have an outer, main switch. If I switch off the whole computer thing with
it (printer, screen, modem etc.) and then back on, well the space bar won't
re-boot the box.
 
Works that way for me too .... and probably everyone else. I believe
that's normal operation.
 
I have a P4P800-E Deluxe. If I switch off the power via a powerstrip (that
is, completely disconnect power to the PC), when I switch it back on, the
space bar will turn the machine on. Every night, I shut down the PC and
then turn off the power at the powerstrip. Each morning, I turn on the
powerstrip and press the space bar. PC boots fine. Go figure... if your
jumper is set and the BIOS is set, seems like it should work.

John
 
Back
Top