How to backup during standby, hibernation

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I just switched our home network from Win 2k Pro to Win xp Pro, and I am now
running into a problem.
Every night, I make backups of the PCs on the network, but now with XP, it
turns that as soon as the PCs go to standby of hibernation, I can not access
them anymore. Is there a way to "wake these PCs up" when the time for backup
has come?
Will a scheduled service get the desktop out of standby to run the backup?

When I let Outlook run overnight on my desktop, then I get error messages
that it can not check the server for mail, so I assume that in Standby, also
all hardware is being disabled. Is that correct?

By the way, I use Vice Versa as backup tool.
 
I just switched our home network from Win 2k Pro to Win xp Pro, and I am now
running into a problem.
Every night, I make backups of the PCs on the network, but now with XP, it
turns that as soon as the PCs go to standby of hibernation, I can not access
them anymore. Is there a way to "wake these PCs up" when the time for backup
has come?
Will a scheduled service get the desktop out of standby to run the backup?

When I let Outlook run overnight on my desktop, then I get error messages
that it can not check the server for mail, so I assume that in Standby, also
all hardware is being disabled. Is that correct?

By the way, I use Vice Versa as backup tool.
Click to expand...
I'm on a stand alone. I can think of three options. Under Control
Panel > Power Settings turn-off standby / hibernate. However that may
not be practical. Another option in the BIOS of each machine, Wake On
Lan, or maybe under BIOS Power Options - don't shutdown HDD or Ethernet
Port during standby. I'd probably experiment with setting each
machine's BIOS to Wake On Lan or Monitor Ethernet Port whichever is
available.



--
________
To email me, Edit "blog" from my email address.
Brian M. Kochera
"Some mistakes are too much fun to only make once!"
View My Web Page: http://home.earthlink.net/~brian1951
 
Thank you Brian for your reply, but can you please be more specific. How and
where do I set the "wake on Lan" option?
I can not imagine that I would be the first one with this issue. It is of
course easier when everyone on the network only saves data at a centralized
server, but that is not an option for me.

Thanks
 
:
Click to expand...
Thank you Brian for your reply, but can you please be more specific. How and
where do I set the "wake on Lan" option?
I can not imagine that I would be the first one with this issue. It is of
course easier when everyone on the network only saves data at a centralized
server, but that is not an option for me.

Thanks
Click to expand...

Please don't top post.

The Wake On Lan setting is located in different menu locations on the
BIOS on each machine in your network. One place it can be found is in
the Power Options or Power Settings submenu in BIOS setup.

Since you are experimenting, you only need to change this setting to
"True" or "On" on only a few machines. Since you are acting as network
administrator I'll assume that you know how to access a machine's BIOS
setup menu.

Here's a definition of WOL that may be helpful:

Definitions of *wake on lan* on the Web:

# (WOL) Wake On LAN provides the capability to remotely power on systems
supporting Wake-On-LAN by simply sending a wake-up frame. To enable
Wake-On-LAN function, your system requires Ethernet LAN adapter card
that can activate Wake-On-LAN function, a client with Wake-On-LAN
capability, and software such as LDCM Rev. 3.10 or up that can trigger
wake-up frame.

We're way beyond windows basics here. You may want to ask your question
on a web based newsgroup like Windows BBS http://www.windowsbbs.com
Which has a forum called Networking.

--
________
To email me, Edit "blog" from my email address.
Brian M. Kochera
"Some mistakes are too much fun to only make once!"
View My Web Page: http://home.earthlink.net/~brian1951
 
Back
Top