How do I get correct AGP Speed Setting

  • Thread starter Thread starter EJR
  • Start date Start date
E

EJR

I'm using XP Professional and have an ATI AIW 9600 Pro video card installed
on an Intel 865PERL motherboard. This is supposed to be a 4x/8x slot but
PerformanceIndex V1.0 reports it as 4x. How do I change the setting to 8x?
There doesn't seem to be a bios setting for this.

Thanks
 
Thanks for the reply but I do have the manula and the only jumper setting
is for BIOS configuration.

Eric
 
You may have to tunnel into the BIOS to find a setting, but
more likely, you need to check the BIOS on the graphics card
or the display properties.

http://www.ati.com/support/manualpd...ER&prod=aiwPCproducts&submit.x=12&submit.y=12


Have you checked Intel.com for all driver updates and did
you install all the Intel drivers?


| Thanks for the reply but I do have the manula and the
only jumper setting
| is for BIOS configuration.
|
| Eric
|
message
| | > Do you have the manual for your motherboard.... there is
probably a jumper
| > setting that must be changed.
| >
| > Cari
| > www.coribright.com
| >
| > | > > I'm using XP Professional and have an ATI AIW 9600 Pro
video card
| > installed
| > > on an Intel 865PERL motherboard. This is supposed to
be a 4x/8x slot but
| > > PerformanceIndex V1.0 reports it as 4x. How do I
change the setting to
| 8x?
| > > There doesn't seem to be a bios setting for this.
| > >
| > > Thanks
| > >
| > >
| >
| >
|
|
 
EJR said:
I'm using XP Professional and have an ATI AIW 9600 Pro video card installed
on an Intel 865PERL motherboard. This is supposed to be a 4x/8x slot but
PerformanceIndex V1.0 reports it as 4x. How do I change the setting to 8x?
There doesn't seem to be a bios setting for this.

Thanks
Click to expand...

What is PerformanceIndex???
Go to Display Properties > Advanced > Smartgart - see if it is set to 8x.
Also do you have the latest Catalyst drivers installed? A better source for
help would be the NG periphs.videocards.ati.
 
Back
Top